开云体育

Thanks Jason and sorry for the dumb questions, I oversaw this. I have to change the system language to English - maybe there are some conflicts with system in German, but I'm not sure. But ARDOP and

You didn't post your Pat settings again but it looks like you have a typo based on the terminal screenshot. It looks like you have entered plughw:,2.0 but it needs to be plughw:2,0 in your pat menu

Hi Jason, changed it with no effect ... pi@raspberrypi:~ $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: b1 [bcm2835 HDMI 1], device 0: bcm2835 HDMI 1 [bcm2835 HDMI 1] Subdevices: 4/4

In your pat settings, your ARDOP command is incorrect. Change it to: /home/pi/ardop/./piardopc 8515 plughw:2,0 plughw:2,0 -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

/g/KM4ACK-Pi/topic/84892066#5226 -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (

When I start B-A-P I get the following, "Failed to execute Child Process 'xterm' (no such file or directory). What do I do?

Here are the PAT settings I forgot first so send 73 de Erwin, OE1EKG

Hi Jason, thanks ... I did it with a fresh BAP installation. Flirr, FLdigi, JS8call and WSJTX are running smooth. So no idea what's going wrong and where I have to do additional settings. Settings of

Hi Jason, Excellent work! I'm just have a few growing pains my diagnostic zip attached. Issue 1: When I Main Menu > Hamradio > Build-a-Pi >Update-Tool A terminal session opens and a GUI dialog box

You have your sound card configured as "plughw:,0". It should be "plughw:2,0". Are you running Build a Pi or is this a manual installation? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) |

If you have had this system built for a while, you may have an old version of the Conky config (.conkyrc) file installed. This could be causing conky not to start correctly. Try reinstalling Conky and

Hello, Do anybody have an idea what my next steps could Bussi Erwin to find the error? I'm sticking on this problem and can't find anything about this in the forum or Web. 73 de Erwin, OE1EKG

Thanks Bill, I'll admit to having given up too easily, at the "no services" message! in future I must also search more thoroughly through the many excellent videos Jason has produced. Great to have so

The audio on a Pi4 is and always be the Achilles heel for a Pi Now I've got some heat problems in my container but aims too correct it soon with an commercial cooler. The Pi hangs up because of heat

I followed Jason's video https://www.youtube.com/watch?v=Qbi62VyLVz8 I just did on my PI-4 and it worked fine. The most important part is : FLRIG, navigate to Config>Setup>transceiver. On the

Well after reinstalling or updating BAP, then rebooting? I lost Conky???

Got it Thanks again

Thanks a million?? It worked like a champ

Please can anyone assist with using a Bluecat Bluetooth adapter? it pairs with the RPi4 but gives a message saying that “no services are supported on the Raspberry Pi”. I have used the adapter

I thought I had that written into the update script ( https://github.com/km4ack/pi-build/blob/master/update#L86 ) but it sounds like I need to take another look. It should give you a warning that you