开云体育

Hi All, I've got flrig working, I can receive just fine and PTT is working but I can't get the pi to send audio to the radio. I've tried all 32 port options and the best I can do is not crash JS8Call

As I said in the beginning, that is my problem. I asked for a source for the cable. Thanks for your suggestions.

Pete, Do you have the DS3231 chip installed on your Pi? It is not a normal part of the Pi. If you have it, the software should recognize it and make the proper install. Les WD5BYQ

During install, the script asked if my system time was 9:55 am, but the actual time on my clock was 10:55 am (which was the correct time). I selected "no" and then it asked me to set my system time or

Try https://wiki.52pi.com/index.php/DockerPi_PowerBoard_SKU:_EP-0104 I don't understand your problem. If you don't have a powerpole to round plug cable, you need to make one or I know HRO carries

No. I ordered the one from Amazon that Jason shows.

Thanks for your reply. I must be using the wrong item name. How do I plug the power from my battery into the connector on the power board? Power poles on one end, round plug on the other into the

Did you order "MakerFocus Power Over Ethernet Poe Hat Expansion Board" ?? as it has no connector.

??? https://www.makerfocus.com/products/dockerpi-power-board-20w5v-4a-power-supply-with-cooling-fan-infrared-remote-control has a barrel connector, unless yours is a new design? Amazon has one with

Thanks, Jason. Resuming seems to have gotten things going again, until it needed the IC2 module...turned that on and started again. It's still building.

Just received my Makerfocus Power Board. Instructions are zip. No barrel connector. Their website doesn’t show one. What is a good source? Thanks, Richard- KI5EVJ

I used the following script to uninstall and the reinstall GPS: sudo apt-get purge gpsd gpsd-clients python-gps chrony python-gi-cairo cd ~/Downloads wget

Thanks, I tried this and got the same results. ?I still do not have all of the BAP308 stuff installed. ?Only the Fldigi group and the GPS group. Bill Norman NO4ON

cgps ?yields nothing. ?I know about the pbm with USB 3.0. ?I have the GPS dongle plugged into the 2.0 slot and I have installed a ferrite loop on the USB cable with about 10 loops. ?I let it run

Hello: I had similar Conky/GPS issues, which I documented in an early forum thread, that diagnosed to the GPS not starting after BAP308 installation. Lots of emails and info, but what it boiled down

Ahaaa. Another 'Ten-Tec' chap :-) I'm an 'Argo' nut. I've had them all at some time in the past. Now I just have 3 - my original 509, the 'Scout' and my Argo 2. All in regular use. Anyway, back to

just a suggestion that may help with conky..... Conky is continually making calls based on a default refresh and an over rife=de that may be placed on individual lines.? If you gut the .conkyrc file

Thanks, Bruce. I may try Fldigi again, then. I also overclocked mine 10% and I disable Conky when running other programs and that significantly improved operations. It really never gets hot, as you

Thank you -- Echodelta10

This is exactly how BAP works for new versions of BAP. It checks github to see if a new version is available and gives the operator a notice allowing them to choose to install the latest version or