开云体育

Just received my Makerfocus Power Board. Instructions are zip. No barrel connector. Their website doesn’t show one. What is a good source? Thanks, Richard- KI5EVJ

I used the following script to uninstall and the reinstall GPS: sudo apt-get purge gpsd gpsd-clients python-gps chrony python-gi-cairo cd ~/Downloads wget

Thanks, I tried this and got the same results. ?I still do not have all of the BAP308 stuff installed. ?Only the Fldigi group and the GPS group. Bill Norman NO4ON

cgps ?yields nothing. ?I know about the pbm with USB 3.0. ?I have the GPS dongle plugged into the 2.0 slot and I have installed a ferrite loop on the USB cable with about 10 loops. ?I let it run

Hello: I had similar Conky/GPS issues, which I documented in an early forum thread, that diagnosed to the GPS not starting after BAP308 installation. Lots of emails and info, but what it boiled down

Ahaaa. Another 'Ten-Tec' chap :-) I'm an 'Argo' nut. I've had them all at some time in the past. Now I just have 3 - my original 509, the 'Scout' and my Argo 2. All in regular use. Anyway, back to

just a suggestion that may help with conky..... Conky is continually making calls based on a default refresh and an over rife=de that may be placed on individual lines.? If you gut the .conkyrc file

Thanks, Bruce. I may try Fldigi again, then. I also overclocked mine 10% and I disable Conky when running other programs and that significantly improved operations. It really never gets hot, as you

Thank you -- Echodelta10

This is exactly how BAP works for new versions of BAP. It checks github to see if a new version is available and gives the operator a notice allowing them to choose to install the latest version or

The barrel center is positive. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (

Thanks Bruce and please do keep experimenting! I never discourage experimentation. It is one of the best things about ham radio. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Bill, The first thing to determine is does the GPS have a lock? Run this command in a terminal window: *cgps* and see if you have data. As you are using the ARGON case, it utilizes the USB 3.0 port on

Don't give up on the build in this particular spot. Especially on the Pi 3 where it may seem hung in this spot for a LONG time. I usually get everything started just before bed and it's done in the

Are there any installation instructions? Checked site. I have everything hooked up with barrel connector with positive on the outer and ground in the center. Connected to power poles and to my 12v

Very good, Pete. Les

Hi Les, thanks. I used the install command listed on git hub. Running BAP again seems to be working this time. Not sure why it quit the first time...

KM4ACK has a YouTube on the subject of the GPS not working. ?I followed it and get nothing. ?I can look in the /etc/default/gpsd file and it has the port assigned to the string that appears in the

Peter, Was this a build being installed by Build-a-Pi (BAP) or some other install? If using BAP, just go back to BAP and chose to reinstall the program, even if the menu says the program is installed.

Never mind...always helps to RTFAQ first. I found the Build-a-Pi script and got things going again.