开云体育

Can you do winlink (HF com) under Linux?

This issue only impacts those that have a previous version of GridTracker installed. It will not impact those installing it for the first time. If you run into this bug, the issue and fix has been

You probably already know this but in that picture it appears you are connected to a wifi network. You won't get a Hotspot unless you aren't connected to a WiFi network.

I just can't get 10.10.10.10 to be enabled. WiFi works fine, just can't see the hotspot in Wifi list.

Greetings all It's been a very slow process for me, but I'm slowly starting to play with BAP. I've opted to use a Rpi 3b+ as my machine for a few reasons....and my rig is my IC-705. Things seem to be

I ran */home/pi/bin/conky/grid and got pi@raspberrypi:~ $ /home/pi/bin/conky/grid EN34nw04ss but Conky still does not show a grid *

This is the webpage ( https://kd9cjx.wordpress.com/2017/11/22/how-to-setup-the-yaesu-ft-891-to-fldigi/ ) that I used when I first got the 891. It's written in regards to Windows but the radio settings

JTDX support was removed from BAP. See this issue ( https://github.com/km4ack/pi-build/issues/153 ) ticket for the reason. I haven't had any other reports on WSJTX not working with 3.0.8. Often, when

Per this site, FLMSG 4.0.19 is the latest http://www.w1hkj.com/files/flmsg/ which is the version that has the issue compiling on the Pi. The fix was posted in this post (

The alternative device is a Banana *Pi* M2- *zero* which should even fit a RPi-zero case, but has a quad-core processor. I keep meaning to look further into that option. =Vic=

Thanks Vic At my time of life, if I am going to invest building anything, it has to be right! -- and thanks for the suggestion re an alternative to the Raspi zero. I'll take a look. The Pi-0 form

Nice looking Go-Box, Bruce. I did not have any trouble running BAP on a RPi-zero, but it is a bit slow when it comes to compiling or running some complexprograms. For example, the decode time in FT-8

Thanks Anthony . I've just republished it as I didn't like the level of audio compression.?https://youtu.be/S-XLRBsN_qM This is all new to me and I wasn't aware that Youtube post-process any uploads.

Thanks Jeff, So it sounds like the first machine corrected itself with the removal and reinstall of the gps...right? The second system, it sounds like to me that the GPS option didn't install when the

Hello Terry: OK 1.? Can your run cgps in a terminal and post the output back to us? [jm] cgps shows the "correct" info as if the GPS is active; data is correct, but I apparently don't know how to?

Bruce, I really like your video intro bumper. Nice job!!? I know this is a side issue but I have to give you a pat on the back as a one who produces videos and live events for a living.? 73' --

I have noticed there ARE now updates for flamp & flmsg (was 2.2.05/4.0.17 as still on web site) now 2.2.06 & 4.0.20 as per fldigi email group ... steve

Yes, I have FLAMP & FLMSG showing "update needed"? BUT if I check the current version @ FL*** web, FLAMP & FLMSG are up to date... I DO have Gridtracker and HAMRS loading, but when run - they tell me

So, just updated to 3.08 and started to navigate around and make sure all was well.? I'm always expecting new update bugs.? To be expected.? Anyway, cannot get JTDX/GridTracker to cooperate.? Both

That display shouldn't matter. Your not using the Signalink for PC audio you are using it for ham stuff, right? So whatever program you are using will have soundcard settings and you pick the