开云体育

I don't think you're doing anything wrong... those are also the only templates in the template FEMA subdirectory on my pi PAT also.? If you check, you will note that the GIS subdirectory lists templates which are not available ... however, those templates have been moved to the main directory (local weather, etc, etc).? Check the PAT interest group ....
73-K2KGJ

I have Pat v2.6.0 running on my Pi.? I have Downloaded the latest Forms and also done the Update Form Templates.
My issue is that I only have 2 FEMA Templates in the list.? They are FEMA Mission Assignment and FEMA Resource Request.
What am I doing wrong that ALL of the FEMA Templates are available.? I am in an ARES Group and we are getting ready for an exercise and I would like to use PAT.

Thanks/73,
Larry
KO4OPE

I setup BAP v. 3.1.3 last November with a couple of modules Pat Winlink and gparted. I now want to activate the autohotspot and any Mobilinkd modules. I cannot see how I can to this. Pse help.

Also, I am on Buster but will update to a new BAP on Bullseye if I can get the Winlink process working.

Awesome instructions! Im brand new to the pi, so im basically copy and pasting here.

Now, Im getting an error while installing js8 this way and i was hoping you could help. Ill attach a picture with this response.

Thank you for any help!

And for reference, im using a 3B+

First run this command:
whereis rigctld
and it will return something like:
rigctld: /usr/local/bin/rigctld
which indicates that rigctld is located at /usr/local/bin/ If yours is different you will need to modify the command below.

In the pi aprs directory, you will find a file called functions. Just above add:
/usr/local/bin/rigctld -m 4 &
save and exit. Now try the starting the modem and see if it works as expected.

--

I found this

[email protected] | Help with CM108 PTT

Thanks Jason,

That fixed it.? Is there a way to run the "rigctld -m 4" command from a batch file when Pi-APRS starts up?

Fritz NM5XD

Thanks Jason.
--
Echodelta10

I found a website



that supposedly makes installing a ds-3231 easy-peasy.? I tried it, and we will see if it worked the next time I visit my shack and have no internet (gps turned off).? The author has two small errors that you? should be aware of.? First,

the ./install.sh is not in the top directory PI-HAT but in the next lower one, "tools"

Second, the command to check the driver installation is missing a "." in front of the forward slash.

Just be aware of this if you cut and paste, like I do.?

In any case, the command reported:

pi@david:~/pi-hats/tools $ ./install.sh -l
rtc_ds1307??? : not installed
rtc_ds3231??? : installed
adc_ads1115?? : not installed

Hi Jason!? I watched your video? again.

Real Time Clock Script for Raspberry Pi

I think I know why I am having a problem with the rtc install in BAP.

I have a DS-3231 rtc module. I see you are using a DS-1307 rtc module. What must I do/change to install this rtc version? Thx!

David SV0SGS

I have been running Bullseye on a 32 bit system without any issues. Currently the 64 bit OS isn't ready for prime time in my opinion.

--

That video was made on a 32 bit system. I haven't confirmed it will work on the 64 bit OS.

--

Change the PTT line in direwolf.conf to:
PTT RIG 2 localhost:4532

Make sure FLRIG is open first, then open Pi-APRS and test again. Should that fail, close Pi-APRS. Open a terminal window and run
rigctld -m 4
It will appear to hang but that is ok. Now open Pi-APRS and try one more time. I don't have a rig setup at the moment to test with. Hence, the two different answers.
--

Are the bugs worked out with BAP and Bullseye enough to rely on for Emcomm? Or stay with Buster?
Thanks
--
Echodelta10

(Thanks for all you do!) working through all the build a pi stuff I can't get my pi to connect to phone gps. I have pi connected by wire and wireless to router. chose wireless. I am SSH into pi from Macbook air and using screen sharing to view pi headless from Mac. When I try to work through the "Stream Mobile Phone GPS to Raspberry Pi" I can't get the GPS to work. I have a Pi 4, using bullseye 64 bit. Entered IP listed in hostname -I on GPS2IP app on iPhone. used that IP and same port number on both phone and in the udp://ip:port. When I type the cgps command the screen comes up for GPS data, but nothing is filled in and it times out. Any idea what I am doing wrong, or what I can do to fix? I did run the GPS update tool.

thanks again for everything you are doing here.?

Hi All,

I'm using BAP 3.1.3 on a Pi4 with Buster, my radio is a Yaesu FT-991A. ? Everything except Pi-APRS is running fine (JS8Call, Flrig, Fldigi).? I'm receiving packets but when I click 'Send Position' my packet info goes to the pi-aprs screen but the PTT doesn't get activated.

I un-rem'd the following in direwolf.conf:

ADEVICE? plughw2,0
MYCALL? NM5XD
MODEM? 1200
PTT? /dev/ttyUSB0 RTS DTR?? (I added DTR based on one of youtube video I watched)
AGWPORT? 8000
KISSPORT 8001
IGTXLIMIT? 6 10 (I don't think I un-rem'd this but it's un-rem'd)
There's a bunch of TTPOINT and TTMACRO stuff that's not rem'd but I'm sure the conf file came that way

I've searched to far ends of the internet and tried everything I can think of but no luck.? Any thoughts/suggestions would be greatly appreciated.

Thanks
Fritz NM5XD

P.S. my USB gps quit working when I installed Pi-APRS and Direwolf. I'm not sure what I did but I'd welcome any thoughts on that also.
Thanks again

On Mon, Feb 21, 2022 at 11:12 AM, Bill Dornbush wrote:

Can you explain this?? It seems that Hamlib is installed by default.? I did not select it when I installed BAP and yet when I run through the update tool, Hamlib is listed as "is latest version."? Also, when I run "pat configure," there are entries under "hamlib_rigs" and when I start "pat" there is a message "unable to get frequency from my_rig...."? It seems to work OK.? I am using a DRA-30 sound card so there cannot be rig control through it, I believe."? What apps are expecting to use FLRIG for rig control?? Can PAT use FLRIG for rig control?

Hamlib shouldn't install by default but some applications (WSJTX) require it to be installed. So even if you didn't choose hamlib but choose to install WSJTX, hamlib would be installed in order for that application to build correctly.

Pat configure is setup for rig control during the BAP install. You can enable Pat Winlink rig control in the Pat Menu settings. It is designed to work with FLRIG though there are other ways to get rig control working without using FLRIG. You will see the "unable to get frequency from my_rig...." because the rig control is defined in pat configure even though you aren't using it in your case.
?
--