开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. KM4ACK-Pi
  2. Messages
Expanded Topics Messages Polls
Date
Re: Update to the YAAC & Dierwolf

 

I tried running it in Terminal mode Dierwolf -p and gave apt-install (deb) My mistake was thinking that YAAC auto started the AWG port. The PORT menu saids "Port 1 sound card" Is this Digirig?

arecord -l

va7dgp@va7dgp-HP-G61-Notebook-PC:~$ arecord l
Warning: Some sources (like microphones) may produce inaudiable results
? ? ? ? ?with 8-bit sampling. Use '-f' argument to increase resolution
? ? ? ? ?e.g. '-f S16_LE'.
Recording WAVE 'l' : Unsigned 8 bit, Rate 8000 Hz, Mono

??

I don't know to make digirig mobile default. Is port 1 digirig?


image.png

image.png

Lost in the land of Linux

73

Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU ? VOICE


Winlink:?va7dgp@...
Subject://wl2k ? ? ? ? ?

ALLSTAR ?530780
Hamshack Hotline
5971
Mid-Island Phone Mesh
2210
2232

? ? ? ? ? ? ? ? ? ?


On Tue, Mar 25, 2025 at 3:27?AM km4ack via <jason.oleham=[email protected]> wrote:
Is direwolf running in the background? Did you get any errors when you started direwolf?
--
73, de KM4ACK
|
|

Re: Update to the YAAC & Dierwolf

 

Is direwolf running in the background? Did you get any errors when you started direwolf?
--
73, de KM4ACK
|
|

No Tx when using VARA

 
Edited

I am running an FT-100D, Pi4 4 GB RAM, and a Drigirig; this setup has been working with JS8Call for many months.
?
I am having issues getting my setup to transmit with FLRIG, PAT, and VARA HF; eventually, the "connection" times out. I have followed KM4ACK's YouTube tutorial several times and still no go.

I did a clean install, twice, of the 64-bit Pi OS as the Pi originally had 32-bit Pi OS. I installed all the previous apps and got them configured, minus CONKY; CONKY will not go into transparent mode, another problem. My last step was to install apps for VARA.? FLRIG test button does get the radio to transmit.
?
If there is a post that covers my problem, please point me to it; several searches did not turn up anything.
?
Thanks for the help.
?
Aaron KD6FLM

Screenshot 2025-03-24 at 8.48.04?PM.png

Re: Update to the YAAC & Dierwolf

 

This from the port setting of YAAC.





image.png

73

Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU ? VOICE


Winlink:?va7dgp@...
Subject://wl2k ? ? ? ? ?

ALLSTAR ?530780
Hamshack Hotline
5971
Mid-Island Phone Mesh
2210
2232

? ? ? ? ? ? ? ? ? ?
Update to the YAAC & Dierwolf

 

I'm trying to figure out why YAAC can not pick up Localhost:8000.

The Port been selected in the AWG setting in YAAC. In the Dierwolf Config AWG port is 8000, kissport:8001.
The screen cap is via my Anydesk remote look.

73


image.png


Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU ? VOICE


Winlink:?va7dgp@...
Subject://wl2k ? ? ? ? ?

ALLSTAR ?530780
Hamshack Hotline
5971
Mid-Island Phone Mesh
2210
2232

? ? ? ? ? ? ? ? ? ?
Re: Build a pi not creating /home/greg/pi-build/build-a-pi

 

Build a Pi was some time back. It was replaced with
?
--
73, de KM4ACK
|
|

64 bit software

 

Is there a list? or repository showing the 64 bit software for the Raspberry pi 5 and bookworm.
Doesn't make sense running 32 bit when you have the additional horsepower of the Pi 5 and 64 bit Bookworm.
?
TIA
Greg
NZ6E
QUESTION regarding Dierwolf and YAAC

 

I'm in the process of setting up Dierwolf?and YAAC. Dierwolf?if I attempt to start in terminal errors out. I know Jason KM4ACK has done script in downloading etc. I have added my call, PTT cm108. When I go to setup for AWG. I think I answer my question. I should have check off Pat Menu I think???

I'm doing this remotely using Anydesk. My screen is small on my laptop and my main monitor is in another room.?

Back to figuring it out.?

73

Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU ? VOICE


Winlink:?va7dgp@...
Subject://wl2k ? ? ? ? ?

ALLSTAR ?530780
Hamshack Hotline
5971
Mid-Island Phone Mesh
2210
2232

? ? ? ? ? ? ? ? ? ?
Re: Smart PI 4 Gurus needed

 

I did install OpenJDK. (Java). YAAC did not work so I gave up and put an old laptop and put Linux 73 on it. YAAC working now. I need to watch the KM4ACK video. I know how on Win 10. I've used AWG and UZ7HO. Deirwolf?is a different kind of program.

73

Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU ? VOICE


Winlink:?va7dgp@...
Subject://wl2k ? ? ? ? ?

ALLSTAR ?530780
Hamshack Hotline
5971
Mid-Island Phone Mesh
2210
2232

? ? ? ? ? ? ? ? ? ?


On Sun, Mar 23, 2025 at 4:06?PM Roderick Wayne Hart Sr. via <rod.hart=[email protected]> wrote:

You need to install openjdk on your system.

From: [email protected] <[email protected]> on behalf of Erick Kozlowski via <KE0SMR=[email protected]>
Sent: Sunday, March 23, 2025 1:24 PM
To: [email protected] <[email protected]>
Subject: Re: [KM4ACK-Pi] Smart PI 4 Gurus needed
?
I had same issue as above. After running 'sudo apt...' I received:
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package openjdk-10-dbg
?
Thanks for help...this is brand new to me.
Re: Smart PI 4 Gurus needed

 

开云体育

You need to install openjdk on your system.

From: [email protected] <[email protected]> on behalf of Erick Kozlowski via groups.io <KE0SMR@...>
Sent: Sunday, March 23, 2025 1:24 PM
To: [email protected] <[email protected]>
Subject: Re: [KM4ACK-Pi] Smart PI 4 Gurus needed
?
I had same issue as above. After running 'sudo apt...' I received:
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package openjdk-10-dbg
?
Thanks for help...this is brand new to me.
Re: Smart PI 4 Gurus needed

 

I had same issue as above. After running 'sudo apt...' I received:
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package openjdk-10-dbg
?
Thanks for help...this is brand new to me.
Re: Build a pi not creating /home/greg/pi-build/build-a-pi

 

After a couple pages of failures, I quit.
?
64 bit, Bookworm and a Pi5 all add up to no go.
?
Too bad. I'm going to rebuild and manually add what I want/need. Too many of the original stuff just doesn't like 64 bit.
Why go to a Pi 5 without 64 bit!
?
Thanks for the suggestions.
?
Greg
NZ6E
Re: Build a pi not creating /home/greg/pi-build/build-a-pi

 

If the git clone doesn't work, or you have other issues before it starts installing, you can do a
rm -rf \$HOME/pi-build
to clean it out and re-do the git command.
--
= = = =

? Kevin? --? KD9EFV
Re: Build a pi not creating /home/greg/pi-build/build-a-pi

 

开云体育

There was a lot of files written in the /$HOME directory.

?

This is on a Pi5 with a M.2 drive so I’m in the middle of a reimage.

Because most of the files are already written, the scrip won’t run again.

AND the script in Jason’s YouTube doesn’t show the \$HOME/pi-build/build-a-pi

?

I’ll give that a try… what the heck, I’ve only reimaged the drive 3 times now!

?

The extra slash worked BUT since I’m running 64 bit I’m getting lots of errors. I guess when it finishes, I’ll know what barfed.

?

Thanks for the hint.

?

Greg

NZ6E

From: [email protected] <[email protected]> On Behalf Of Kevin via groups.io
Sent: Sunday, March 23, 2025 1:04 PM
To: [email protected]
Subject: Re: [KM4ACK-Pi] Build a pi not creating /home/greg/pi-build/build-a-pi

?

[Edited Message Follows]

What directories do you have in 'home/greg'?

did you forget the \ in front of the second "&HOME/pi-build/"?

If you try

git clone \$HOME/pi-build && bash \$HOME/pi-build/build-a-pi

do you get a 'normal' result?

--

= = = =

? Kevin? --? KD9EFV
Re: Build a pi not creating /home/greg/pi-build/build-a-pi

 
Edited

What directories do you have in 'home/greg'?
did you forget the \ in front of the second "&HOME/pi-build/"?
If you try
git clone \$HOME/pi-build && bash \$HOME/pi-build/build-a-pi
do you get a 'normal' result?
--
= = = =

? Kevin? --? KD9EFV
Build a pi not creating /home/greg/pi-build/build-a-pi

 

Pi 5
OS Bookworm
?
Running the script?
git clone \$HOME/pi-build && bash &HOME/pi-build/build-a-pi
?
It downloads a bunch then errors out with
/home/greg/pi-build/build-a-pi: no such file ordirectory
?
Ideas?
?
Greg
NZ6E
Re: 73Linux and HSTools

 

Did you ever get an answer on this? I'm also curious how to get this to work right with current versions of Raspberry Pi OS. Seems you can only turn on the hotspot if you have access to the desktop (which kinda defeats the purpose for our use).

Re: TS-2000 PTT Setup Issues

 

开云体育

Ah, ok very helpful.? Thank you will give it a try.?

?

KM6QAQ

73

?

From: [email protected] <[email protected]> On Behalf Of Brian Dale via groups.io
Sent: Saturday, March 22, 2025 2:29 AM
To: [email protected]
Subject: Re: [KM4ACK-Pi] TS-2000 PTT Setup Issues

?

Aside from accessing top through a terminal window, you have a desktop program that does the same thing called System Monitor.

?

On Sat, Mar 22, 2025, 04:57 Phil Culmer 2E0HGU via <2e0hgu=[email protected]> wrote:

[Edited Message Follows]

Hi Jeremy,

?

I can’t speak to the radio, but the equivalent of task manager in Linux as a text mode program called top. If you open a terminal and type top, then a list of processes will come up. If you press k, this will tell it to kill that process, (correction select a process and press k. You can also press k and type in the process number; by default, the number will be the process at the top of the screen) and it will ask you if you want to use signal 9 to kill it (a normal exit) or signal 15 (forcing it to exit). I’m sure you’ll get that hang of it with a litttle exploration- it has a few explainers on screen, and IIRC, h will bring up help. When you’re done, q will exit top.

?

73

Phil

2E0HGU
Re: TS-2000 PTT Setup Issues

 

开云体育

Sorry, I was onto another troubleshoot with Windows then realized you were helping me troubleshoot my Linux problems.

?

I’ll give it a look and get back to you.

?

KM6QAQ

73

?

From: [email protected] <[email protected]> On Behalf Of Phil Culmer 2E0HGU
Sent: Saturday, March 22, 2025 1:57 AM
To: [email protected]
Subject: Re: [KM4ACK-Pi] TS-2000 PTT Setup Issues

?

[Edited Message Follows]

Hi Jeremy,

?

I can’t speak to the radio, but the equivalent of task manager in Linux as a text mode program called top. If you open a terminal and type top, then a list of processes will come up. If you press k, this will tell it to kill that process, (correction select a process and press k. You can also press k and type in the process number; by default, the number will be the process at the top of the screen) and it will ask you if you want to use signal 9 to kill it (a normal exit) or signal 15 (forcing it to exit). I’m sure you’ll get that hang of it with a litttle exploration- it has a few explainers on screen, and IIRC, h will bring up help. When you’re done, q will exit top.

?

73

Phil

2E0HGU
Re: TS-2000 PTT Setup Issues

 

开云体育

Well got it figure out for PTT.? Found this gentleman’s website:?

?

Helped a great deal.? Also, make sure your radio / FLrig is tuned onto a ham frequency.? I was on something weird and the radio recognized it and would let me PTT.?

?

Now I have an issue with WSJT-X not kicking out full volume from my Windows 11 laptop.?

?

I’m using the old Windows sound control panel and its barely at ? range with power slider in WSJT-X turned up full.? Microsoft is great!

?

KM6QAQ

73

?

From: [email protected] <[email protected]> On Behalf Of Phil Culmer 2E0HGU
Sent: Saturday, March 22, 2025 1:49 AM
To: [email protected]
Subject: Re: [KM4ACK-Pi] TS-2000 PTT Setup Issues

?

Hi Jeremy,

?

I can’t speak to the radio, but the equivalent of task manager in Linux as a text mode program called top. If you open a terminal and type top, then a list of processes will come up. If you press k, this will tell it to kill that process, and it will ask you if you want to use signal 9 to kill it (a normal exit) or signal 15 (forcing it to exit). I’m sure you’ll get that hang of it with a litttle exploration- it has a few explainers on screen, and IIRC, h will bring up help. When you’re done, q will exit top.

?

73

Phil

2E0HGU
101 - 120 of 13705