|
Computer:Evolve III Maestro 11g
Hamtools:73Linux OS: LinuxMint Virginia upgraded from Vanessa using mintupgrade Radio: IC-705 I¡¯m trying adjust audio capture levels so VARA-HF, VARA-FM, ARDOP, Direwolf have the appropriate input levels. ?However, when trying to make adjustments ALSAMIXER says for the USB Audio Codec ¡®This sound device does not have any capture controls¡¯. ?Any suggestions on how to gain control over the capture input? 73 de K0JNR |
|
Re: "ARDOP Modem FAILED to Start" Error Linux Mint 21.3 (x64)
Yeah... something's not geehawing in my setup. I have restored from a very early backup after configuring my system and, after deleting the 73Linux folder, have re-run the 73Linux script. I don't select much - ARDOP, JS8Call, Pat, and PatMenu. All of those installed except Pat. I figured this out when running pat configure and I was told by the system that there was no such command as "pat." Well, that got me thinking... I'm inclined to believe this has something to do with Mint 21.3. My RPi 5 / 8GB arrived today so I'll be playing with that for a few days and getting it setup. |
|
Re: "ARDOP Modem FAILED to Start" Error Linux Mint 21.3 (x64)
I can confirm that in that my case on the Evolve III Maestro 11G laptop. ?That installing LinuxMint 21.0 Vanessa and then 73Linux. ?Will get everything working. ?Then I ran mintupgrade to 21.3 Virginia and the configuration stuck and ARDOP and AX.25 will run. ?Not sure it¡¯s best approach, but so far, I¡¯m not seeing any issues.
73 de K0JNR |
|
Re: "ARDOP Modem FAILED to Start" Error Linux Mint 21.3 (x64)
On Thu, Jan 18, 2024 at 06:54 AM, Jim-K?JNR wrote:
I¡¯m going to try and step forward the upgrades of Linux Mint to Virginia to see, if the settings stick and these applications will continue to work.Sounds good. I had not thought of downgrading and stepping back into the latest. Let us know how it goes. Joel - W4JBB |
|
Re: "ARDOP Modem FAILED to Start" Error Linux Mint 21.3 (x64)
¿ªÔÆÌåÓýI had a similar issue this week and with Direwolf on Linux Mint 21.3. ?However, I reinstalled Vanessa and these are working. ?I¡¯m going to try and step forward the upgrades of Linux Mint to Virginia to see, if the settings stick and these applications will continue to work.73 de Jim K0JNR On Jan 18, 2024, at 6:36?AM, W4JBB <joel.b.black@...> wrote:
|
|
Re: "ARDOP Modem FAILED to Start" Error Linux Mint 21.3 (x64)
On Wed, Jan 17, 2024 at 12:35 PM, John Friede wrote:
On my Linux Mint desktop, the result of arecord -l and aplay -l indicate the USB codec for my 7300 is Card 1, device 0.? I will try plughw3,0 and see what happens Mmm... If your arecord -l and aplay -l commands show card 1, device 0, I don't think card 3, device 0 will work for you (unless you have a device with those parameters). Unless it's a themes, fonts, icons issue with Pat Menu (I have changed all three to a Kali-based theme with Kali-based icons and fonts)... I cannot fathom a reason why I can start ardopc64 from my home folder or from the full path but it will not start in Pat Menu.
|
|
Re: Patreon:Re: [KM4ACK-Pi] PAT Menu fails treying to open localhost or 127.0.0.1
¿ªÔÆÌåÓýWhy is there a? (? .? )? in the ARDOP
path in the example below?
That does not show up in Jason's
example.
Ed, KD9FRQ
On 1/16/2024 7:22 AM, NR4U via
groups.io wrote:
|
|
Re: Patreon:Re: [KM4ACK-Pi] PAT Menu fails treying to open localhost or 127.0.0.1
Your pat server (pat service) isn't running in the background like it should be. What happens if you start pat from the command line with:
pat http I'll guess it produces errors and won't start. This typically indicates an error in your pat config file. If this is the case, try Pat Menu->Manage Pat Winlink->Repair Pat Config -- 73, de KM4ACK
|
|
|
|
Re: Patreon:Re: [KM4ACK-Pi] PAT Menu fails treying to open localhost or 127.0.0.1
NR4U Bob Kentucky
Sent with secure email.
On Tuesday, January 16th, 2024 at 07:25, km4ack via groups.io <jason.oleham@...> wrote: I can't see enough of the screen shot you sent. Open Pat Menu->Quick Stats and tell us what is in the "Pat Port" box. Also from, Pat Menu->Setting/Config->Current Config Setting what is in the Pat Port setting on this page? If these don't match, it will cause the issue you are running into. -- -- NR4U Bob N.E. KY |
|
Re: "ARDOP Modem FAILED to Start" Error Linux Mint 21.3 (x64)
Unfortunately, that did not fix it. the issue. I tried the full path directory; when that didn't work, I tried my home directory; and when that didn't work, I tried just the command. All three failed to start ARDOP from Pat menu. Yep, I hit update on the config screen all three times.
What I did figure out though is, if I start the modem from Pat menu, after it fails, Pat starts the http session and connects to my radio via Flrig. If I then start ARDOP using terminal, it keys the radio fine. I have another issue with ARDOP using 73Linux but I'll create a different thread for that. Regards, Joel - W4JBB |
|
Re: Patreon:Re: [KM4ACK-Pi] PAT Menu fails treying to open localhost or 127.0.0.1
I can't see enough of the screen shot you sent. Open Pat Menu->Quick Stats and tell us what is in the "Pat Port" box. Also from, Pat Menu->Setting/Config->Current Config Setting what is in the Pat Port setting on this page? If these don't match, it will cause the issue you are running into.
-- 73, de KM4ACK
|
|
|
|
Re: PAT Menu fails treying to open localhost or 127.0.0.1
73Linux
Pi4B - 4GB RPI Bookworm 64-Bit IC-705 using Flrig Thanks for the replys.? So, here are some updates.? Deleted the 73Linux Folders, config.json file to ensure all previous settings were removed. Installed a Fresh install of 73Linux.? 1. The Gridsquare in Conky started working.? I had previous followed the conky fix from Jason's video, but it did not fix it.? However this re-install allowed it work. 2.? The reinstall gave me a clean Pat Configure.? Updated? the Pat config settings in Pat Menu.? However, the changes do not update Pat Configure, nor does the repair.? However, if I update Pat Configure with my callsign, winlink passowrd, grid square then Pat Server becomes active. 3. Right now, I'm focused on getting ARDOP working.? With Pat Active, I Start ARDOP Modem, Pat Launches with ARDOP.? The waterfall can shows that it is listening.? However, if I try to send a CW ID, ARDOP goes into transmit, but it does not key the 705 via FLRIG.? RIGCTL shows OFF in Conky.? I suspect this is because I don't have Pat Configure set right for rigctl.? I think this is due to Pat Settings/Config not properly update Pat Configure.? So, If I can see a good example of what a 705 with flrig looks like, I should be able to make some manual entries. 73 Jim K0JNR ReelfootJim {
? "mycall": "K0JNR",
? "secure_login_password": "",
? "auxiliary_addresses": [],
? "locator": "EM48ON",
? "service_codes": [
? ? "PUBLIC"
? ],
? "http_addr": "localhost:8080",
? "motd": [
? ? "Open source Winlink client - getpat.io"
? ],
? "connect_aliases": {
? ? "telnet": "telnet://{mycall}:CMSTelnet@...:8772/wl2k"
? },
? "listen": [],
? "hamlib_rigs": {},
? "ax25": {
? ? "engine": "linux",
? ? "rig": "",
? ? "beacon": {
? ? ? "every": 3600,
? ? ? "message": "Winlink P2P",
? ? ? "destination": "IDENT"
? ? }
? },
? "ax25_linux": {
? ? "port": "wl2k"
? },
? "agwpe": {
? ? "addr": "localhost:8000",
? ? "radio_port": 0
? },
? "serial-tnc": {
? ? "path": "/dev/ttyUSB0",
? ? "serial_baud": 9600,
? ? "hbaud": 1200,
? ? "type": "Kenwood",
? ? "rig": ""
? },
? "ardop": {
? ? "addr": "localhost:8515",
? ? "arq_bandwidth": {
? ? ? "Forced": false,
? ? ? "Max": 2000
? ? },
? ? "rig": "my-rig",
? ? "ptt_ctrl": true,
? ? "beacon_interval": 0,
? ? "cwid_enabled": true
? },
? "pactor": {
? ? "path": "/dev/ttyUSB0",
? ? "baudrate": 57600,
? ? "rig": "",
? ? "custom_init_script": ""
? },
? "telnet": {
? ? "listen_addr": ":8774",
? ? "password": ""
? },
? "varahf": {
? ? "addr": "localhost:8300",
? ? "bandwidth": 2300,
? ? "rig": "",
? ? "ptt_ctrl": false
? },
? "varafm": {
? ? "addr": "localhost:8300",
? ? "bandwidth": 0,
? ? "rig": "",
? ? "ptt_ctrl": false
? },
? "gpsd": {
? ? "enable_http": false,
? ? "allow_forms": false,
? ? "use_server_time": false,
? ? "addr": "localhost:2947"
? },
? "schedule": {},
? "version_reporting_disabled": false
}
?
|
Jim-K?JNR
Joel Black - W4JBB
km4ack
dc2jr
NR4U
Brian Dale