开云体育

Just a suggestion, ditch the GPS and stream GPS data from your phone with GPSD. It's so much easier and no need to tie up a USB port. [email protected]> wrote:

So I'm have problems getting my evolve III to play nice with the gps. The problem is the 6100 uses 2 ports acm0 and acm1 the gps also uses acm0 and locks up the computer. I have tried all kinds of

I just noticed that my pi-weather station cannot get 7 day weather forecast, on elewin's GitHub page he's referring to a change to 5-day forecast but not sure how to make the change. Any help would be

Oops sorry typo: `winetricks allfonts`

This is just a guess, but (assuming winetricks is installed) have you tried running `winetricks all-fonts`? If that doesn’t work, you might also try running `wine winecfg` and playing with the

I did that with an RTLSDR dongle, SDR Sharp, free oscilloscope software and a Windows Laptop Frequency Deviation Measurement with an RTL-SDR Dongle ( https://www.youtube.com/watch?v=lWcFqsh7ZvQ )

On Sat, Aug 24, 2024 at 09:00 PM, <farpoint16@...> wrote: > > I’m running Virtual Radar Server a long with Dump1090 on my new install of > Linux Mint 22. Both programs work fine but the on the

I’m running Virtual Radar Server a long with Dump1090 on my new install of Linux Mint 22. Both programs work fine but the on the GUI for virtual radar server none of the text on the UI buttons

If it is a 32 bit system, try LMDE6, which is for 32 bit machines and is one of the few 32 bit distros around. It is based on LinuxMint.

Hi I have an HP Stream 7 tablet computer that I would like to put Linux onto. ?Any recommendations for Linux distro that would produce a functional tablet OS? Several years ago, I did manage to put

Our local EmComm group run PSK on our repeater. No special requirements. I think we are running 8PSK500 if I remember right. I would have to look at the setup to verify that. It was a trade of speed

I don't see the "Rig Control > Yes" option in my PAT config?

Steve I used a AX25 terminal via BPQ32 software. I know when I ran that software there were some USA Operators that were using Fldigi as an engine to communicate. I also sent pictures as a new

Thanks very much Brian! I'll look into Soundmodem and Direwolf but will first see if I can go with just using my Digirig and a few command line calls in the terminal (kissattach and kissparms)... I'll

Packet radio means AX.25. FLdigi does not support packet radio. Soundmodem or Direwolf are the go to packet software modems. Yes, standard packet radio is 1200 baud. [email protected]> wrote:

Hi, This topic may not be the best match for this group but in hopes someone out there is using Fldigi on FM (maybe on a repeater) then if you have any pointers it would be great! I'm going through

"mycall" : "K6ORJ" , "secure_login_password" : "##" , "auxiliary_addresses" : [] , "locator" : "DM06##" , "service_codes" : [ "PUBLIC" ] , "http_addr" : "localhost : 8080" , "motd" : [ "Open source

I run both IC 7100 and IC 705. Have set up the Pat Menu for Rig Control > Yes? Have you done ls /dev/serial/by-id to ensure you use the right sound codec? Are you using FLrig for PTT? 73 Don

From my Debian box I had PAT controlling the IC-7100 all except TX.? Even the tones were going over the air if I keyed the microphone now I can't get anything to talk to anything. K6ORJ

Got it resolved. Error messages gone.