¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Re: 73Linux New Install - lots of Gdk-CRITICAL messages - and after install no 73Linux background no WSJT-X in menu
OK - back to this after work interfered for a week (but I'm retired...). So it turns out I am running wayland. I thought I had seen that x11 was the default - but that is wrong. You can see what it is
By Jim KM6GUO · #13227 ·
Re: TQSL not installing from 73linux
I'm not currently running Bullseye on anything so I don't know. [email protected]> wrote:
By Brian Dale · #13226 ·
Re: TQSL not installing from 73linux
Sorry, nvm. It's bullseye. Should that work ok?
By Demonmariner · #13225 ·
Re: TQSL not installing from 73linux
Ok. That probably explains a lot. What version should I use on a pi 4, for minimal problems?
By Demonmariner · #13224 ·
Re: TQSL not installing from 73linux
Unfortunately, you are a few OS versions behind. After Buster came Bullsye. After Bullsye came Bookworm. I love Buster and still run it on most of my Pi's but it's no longer supported by a lot of
By Brian Dale · #13223 ·
Re: TQSL not installing from 73linux
Sorry, meant to say. Raspi Buster.
By Demonmariner · #13222 ·
Re: TQSL not installing from 73linux
I'll have to look into this and see if I can replicate it here. Are you using Pi or x86 machine? Which OS? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (
By km4ack · #13221 ·
TQSL not installing from 73linux
The title. I tried installing tqsl from 73linux twice, each time it seemed to go through the motions but didn't install. Any suggestions? My next step would be try installing from repo, but would
By Demonmariner · #13220 ·
Re: I am about to set up a new Raspberry Pi - which OS is best for 73Linux
Per https://github.com/km4ack/73Linux ( https://github.com/km4ack/73Linux ) "So far 73 Linux has been tested on the Pi 4 running Pi OS 32bit.... You can run 73 Linux right on top of your old Build a
By Carol KP4MD · #13219 ·
Re: Hamlib rigctl error
Tried a few things this morning, on a backup sd card: 1. Uninstalled wsjtx, since it was installed from apt rather than 73linux. 2. Ran sudo apt remove libhamlib-utils as suggested by Jason. 3. Tried
By Demonmariner · #13218 ·
Re: 73Linux New Install - lots of Gdk-CRITICAL messages - and after install no 73Linux background no WSJT-X in menu
Have you updated to the latest version (4.1.1) of 73Linux? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) |
By km4ack · #13217 ·
Re: Recommendation Linux bistro for HP Stream 7 tablet
Thanks for the info. ?I found that that Stream 7 is 64-bit but restricted to 32 bit by the bios. ?I did try the LMDE6, loading from the USB drive to check it out. ?It did run, but bombed when
By Larrie · #13216 ·
Re: Hamlib rigctl error
Brian: I'm trying Pat Winlink. I might try Winlink Express, but have no experience with WINE to speak of. I might give it a shot. Rigctl errors out as described, so changing the rig won't work. I'd
By Demonmariner · #13215 ·
Re: 73Linux New Install - lots of Gdk-CRITICAL messages - and after install no 73Linux background no WSJT-X in menu
I am running x-11 desktop. Still no joy getting wsjt-x installed.
By Jim KM6GUO · #13214 ·
Re: Hamlib rigctl error
Sounds like he has rigctl built from source by 73Linux and installed from the repo. Try removing the one from the repo: sudo apt remove libhamlib-utils -- 73, de KM4ACK YouTube (
By km4ack · #13213 ·
Re: Hamlib rigctl error
If you're talking about PAT, using rigid #4 (FLrig) in Hamlib and configuring FLrig might be the better option. It offers a lot more control and is also the better solution if using multiple rig
By Brian Dale · #13212 ·
Re: Hamlib rigctl error
When you say "Winlink", are you meaning PAT or Winlink Express under Wine? If it's the latter, Winlink Express has CAT control built in so if you're trying to run some other CAT control program there
By Brian Dale · #13211 ·
Re: Evolve III gps x6100
Thank you! I will try it! Cool!
By Bill KM6TAU · #13210 ·
Hamlib rigctl error
Trying to set up Winlink and hit a roadblock with hamlib. Installed it through 73linux and when I input rigctl -l I get the error: Undefined symbol: debugmsgsave I am on Buster. Thanks for any help.
By Demonmariner · #13209 ·
Re: 73Linux New Install - lots of Gdk-CRITICAL messages - and after install no 73Linux background no WSJT-X in menu
Thank you. I will have to research Wayland and X-11. I just did a clean Raspbian install - and didn't realize there was a choice here, so I am not sure which I am running... What I assumed to be
By Jim KM6GUO · #13208 ·