开云体育

The only two things I did differently were that I didn't manually download.the forms. I "updated" them through the PAT program at the top screen (and that did download them all). Also, I put my path

I downloaded the forms manually last night and extracted them into the folder that was listed here.

Did you check to see if you downloaded the forms and put them in the folder you pointed the program to?

That makes sense. I did that but still no templates seen. The good thing is that I’m no longer having the Pat modem turn off… Here’s a screenshot of my config.json file to verify I’m adding

This is a known issue that I don't have a good answer for at this time. I am working on BAP 3.0.8 but a fix for Conky will probably not make it into the next release. You are correct that it will

I have exactly the same issue using a Pi400, my workaround is indeed restart Conky. I only have this issue using the “ Raspberry Pi OS with desktop and recommended software ” image. When I am

Yes please.. I would really like to see the settings you are using on WSJT-X. Something else that surprised me was your baud rate. I'd never seen anyone using higher than 9600. Thank you for

Same problem I had...I posted what I did to correct that. Deleted the line I added, reinstalled PAT with BAP, rebooted and it worked fine after that. I'm no expert but that's what I did to 3 different

I have to be missing something because the green “PAT ACTIVE” item in Conky switches to a red “PAT OFF” when I add that line into the config.json file.

You have to add the line: "forms_path": "/home/pi/.wl2k/Standard_Forms"

Ok, so I run the command “Pat configure”. Got that. It opens the config.json file. I’m not a Raspberry Pi wizard and I don’t see any thing about the forms in the config.json file. Besides the

As previously posted: Use 'pat configure' to point to the template folder. E.g. on a Mac: "forms_path": "/Users/walter/.wl2k/Standard_Forms" on an Raspberry Pi: "forms_path":

Manualky downloaded the form templates, but Pat doesn’t see them. Do I need to do something for Pat to see the new forms? Thanks

I plug everything in with everything powered off (except the computer as it doesn't care!), then turn on the Signalink and finally the radio... Though I'm not sure it really matters! I can post the

Also have to do this apparently: Download templates from Winlink.org Unzip the Standard_Forms archive Use 'pat configure' to point to the template folder. E.g. on a Mac: "forms_path":

BAP will update PAT. You have to run pat and select actions update forms template.

Thank you so very much for the help!! I will give those settings a try this weekend. Is there a certain power on sequence that you use? I've read the the sequence can make a difference. I'll let you

Thanks Jeff, appreciate the input. 73.

That’s all that Jason said to do for now. I think he’s check with the Conky devs???? Guess they’re still working on the issue. Thanks & 73, Jeff K3JRZ K3JRZ.jeff@...

Jeff said: As I said in the original message... I'm trying to fix a fix for the problem, not a workaround that I already know about! :-) Simply rerunning conky, using the method you mentioned, will