开云体育

Mitch: Thanks for the information. I had read that blog post over the weekend, but although the autor provides crucial information, I was unable to tie his ideas together enough to make the project

This feature is in alpha test at the moment.? I have been testing it and standard forms work great.? The developers are working to get it available for a beta test soon. -- --Bill AA6BD

From gpsmon -n tcp://localhost:2947 Unknown device> OAOA[A[A[A[A[A systemctl is-active gpsd active pi@raspberrypi:~ $ systemctl is-active chronyd active Bus 002 Device 001: ID 1d6b:0003 Linux

I have the same GPS. Sitting in the window sill it sees some satellites but not enough to lock all the time. It's in a a north facing window in a house with a metal roof :/ so I'm not exactly giving

I have the same one. It flashes but doesn't really work on the PI. I tried the Build a Pi and TNC-X Pi script. It's supposed to allow it's GPS to pull in Winlink Gateway which it doesn't. 73 *Don

Yes. Exactly.

Which GPS are you using? This one? https://amzn.to/2VuoqFD -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) |

Running a Build a Pi 3 on a 3B+. When I plug my gps in, conky freezes on my screen. My system clock continues to run correctly, but I have to unplug my gps and I lose my grid square.

That worked. Thanks. -- 73 de N5RKE

Getting closer... I read on an old thread about the modem radio channel select set to auto choose a channel for the wifi possibly causing issues. I set the router radio to a set channel and it seemed

Thank you sir. That's what I needed to know. 73, Harry, W1HMM

Not without modifying the Pi-APRS source code. Pi-APRS uses direwolf as the TNC. Since the radio has a hardware TNC, you wouldn't be able to use it along with direwolf. -- 73, de KM4ACK YouTube (

Could this also be used for the Pi-APRS app? --Harry, W1HMM

I’m afraid you may have some bad hardware. I bought a 4B as soon as it came out and the hdmi outputs flicker every few seconds. Seems to be a fairly common problem. You might check on the Raspberry

If you already have a case you like, and don't want to replace it, you might try using one of these: https://smile.amazon.com/gp/product/B071XCHZNB/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 I

SAMPLE ARRL RADIOGRAM VIA WINLINK Pi1 R na na 25 Thu Jun 29 2020 09:26:34 GMT-0400 (Eastern Daylight Time) N4MIO GRAHAM,NC KMACK-PI BT No worries about who is using what on the other end if you format

Here you go guys, I drilled a few holes in the top cover.

I played around with this exact thing on Friday. I was able to get my radio connected to the Pi via Bluetooth, and I got it to send enough data to connect to the RMS Gateway. Once connected though, it

I am one of those waiting for the merger (or the full WinLink port to Pi). Our local ARES and State ARES "really like" the forms built in to WinLink. I am focusing on the Pi because of the 12v power

Jason, KM4ACK, Yep, that is what I am trying to find : a full case with the power port and a top. Thanks.?? I hope your one hour packing drill worked and you a good FD outing. I was stuck at home due