The offset can be set in the .conkyrc file found in your home directory.
--
73, de KM4ACK
|
|
|
Re: pi5 73LINUX Conky box too high
I was able to fix the transparency by putting this in the conkyrc file.
own_window = true,
own_window_type = 'normal',
own_window_transparent = false,
own_window_hints = 'undecorated,sticky,skip_taskbar,skip_pager,below',
own_window_colour = '#000000',
own_window_argb_visual = true,
own_window_argb_value = 15,
Still haven't figured out how to reposition the box
I have the black box, but I do have the content. Just can't move it down. I fid move the task bar ho the bottom, but that's not a fix.?
Watching this and the previous Conley question closely¡my new 73Linux build on a Pi4 and also have conky overlapping the task bar and it¡¯s also just a black box with no content.
Adam, KM7N
?
I built a 73linux load on a new pi5 and the Conky box overlaps the task bar at the top. Not sure where I can change the code to move the box down. Any help would be greatly appreciated.
Bob, W1RPQ
|
Re: pi5 73LINUX Conky box too high
I have the black box, but I do have the content. Just can't move it down. I fid move the task bar ho the bottom, but that's not a fix.?
Watching this and the previous Conley question closely¡my new 73Linux build on a Pi4 and also have conky overlapping the task bar and it¡¯s also just a black box with no content.
Adam, KM7N
?
I built a 73linux load on a new pi5 and the Conky box overlaps the task bar at the top. Not sure where I can change the code to move the box down. Any help would be greatly appreciated.
Bob, W1RPQ
|
Re: pi5 73LINUX Conky box too high
Watching this and the previous Conley question closely¡my new 73Linux build on a Pi4 and also have conky overlapping the task bar and it¡¯s also just a black box with no content.
Adam, KM7N
toggle quoted message
Show quoted text
On Feb 24, 2025, at 04:20, robert nazro via groups.io <bnazro@...> wrote:
?
I built a 73linux load on a new pi5 and the Conky box overlaps the task bar at the top. Not sure where I can change the code to move the box down. Any help would be greatly appreciated.
Bob, W1RPQ
|
pi5 73LINUX Conky box too high
I built a 73linux load on a new pi5 and the Conky box overlaps the task bar at the top. Not sure where I can change the code to move the box down. Any help would be greatly appreciated.
Bob, W1RPQ
|
Built a 73linux?load on a new pi5 and the Conky window overlaps the uper task bar. Is there an entry in the code that will move the box down? The ALTor CTL and mouse drag do nothing. Thanks.
--
|
I have conky running on the latest version of bookworm 64 bit using LABWC.?
Add the followingthe following lines to conky.config section of .conkyrc:
? ? out_to_x = false,
? ? out_to_wayland = true,
?
?
|
has anybody found a way for the text to show colors.
|
My old PI3 failed after many years of good service.
?
So I purchased a new pi5 (4 GB version) and installed Bookworm 64 bit version, bit of a nightmare not much worked.
?
Now I have switched to 32bit, also switched to X11 backend, had some GPS issues but have resolved them.
?
However I just get a black box on the RH side of the screen where conky should be, I have looked at a few posts, but so
far have been unable to get it working.
?
Should I go back to an older version of the o/s (this doesn't fee like the right option)?
?
Is there a guide anywhere on how to fix conky?
?
I am going to be mainly using WSJT-X and Pat are there any know issues with these?
?
Thanks and Regards
?
Paul (M0PJA)
|
Re: HOWTO digipeat with Mobilinkd TNC3 and RPi Zero 2W?
You should change the line
? ? serial-device /dev/rfcomm0 KISS
to something like
? ? serial-device /dev/ttyACM0 19200 8n1 KISS
?
|
Re: HOWTO digipeat with Mobilinkd TNC3 and RPi Zero 2W?
Cool thanks, probably just the port line right? ? KM6QAQ ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of John Ogren via groups.io
Sent: Thursday, February 20, 2025 3:44 PM
To: [email protected]
Subject: Re: [KM4ACK-Pi] HOWTO digipeat with Mobilinkd TNC3 and RPi Zero 2W?? I don't see why not, all you should need to do is change one line to point to the serial port used by the Nucleo TNC.
|
Re: HOWTO digipeat with Mobilinkd TNC3 and RPi Zero 2W?
I don't see why not, all you should need to do is change one line to point to the serial port used by the Nucleo TNC.
?
73,
John WX0M
|
Re: HOWTO digipeat with Mobilinkd TNC3 and RPi Zero 2W?
Curious if this can be adapted to the Mobilinkd Nucleo TNC serial DIY version?
I running APRS out APRSIS32 and Pinpoint.? I believe the programs allow digipeating.?
I'm hoping I can figure out how to get KM6LYW's digipi software to work with it.? Two different processors though.? STM32 verses Pi.?
KM6QAQ 73
I've updated the procedure to work more reliably with Bluetooth pairing of the Mobilinkd. I've also written a Python program and added a section to automatically update the APRX configuration file if you have a GPS connected and the location has changed.
?
John WX0M
?
|
Re: HOWTO digipeat with Mobilinkd TNC3 and RPi Zero 2W?
I've updated the procedure to work more reliably with Bluetooth pairing of the Mobilinkd. I've also written a Python program and added a section to automatically update the APRX configuration file if you have a GPS connected and the location has changed.
?
John WX0M
?
|
Re: HOWTO digipeat with Mobilinkd TNC3 and RPi Zero 2W?
Here's a detailed write up of my procedure for setting up APRX as a digipeater on the Pi Zero 2 W with a Mobilinkd TNC3 as the interface to the radio.
?
73,
John WX0M
|
Hi,
I have some trouble with direwolf, digiriglite on a Raspberry Zero2
When I try to transmit, the red led on the digirig lights on, but the HT does not transmit.
Receiving works (sometimes)
My direwolf.conf is straight forward:
?
ADEVICE plughw:3,0
CHANNEL 0
MYCALL DF6PA-14
MODEM 1200
GPSD
PTT CM108
AGWPORT 8000
KISSPORT 8001
TBEACON DELAY=0:30 EVERY=2:00 VIA=WIDE1-1,WIDE2-1 SYMBOL=car comment="DF6PA test"
?
First I thought it might by a sound level issue. So I used alsamixer: (see attached screenshot)
What did I miss?
Same DigirigLite, same cables, work great when using APRSDroid on Blackview. mobile-phone
Every help is welcome?
73, Stephan, DF6PA
--
Stephan Forth
DF6PA
Mainz Germany
|
Re: direwolf: Sound device changes at reboot or when soundcard is detached an reattached
Hi,
?
thanks to all. It works. DigiRig Lite now gets always the same id! ?
?
73, Stephan
?
--
Stephan Forth
DF6PA
Mainz Germany
|
Thanks for this. ?I appreciate it. ?I¡¯ll try to make that work. ?I just changed the port on my LinBPQ node to point at my VARA FM on a different machine, but having it all self contained would be better.
toggle quoted message
Show quoted text
On Feb 15, 2025, at 08:50, Brian Dale via groups.io <bdale.droid@...> wrote:
?
If the heavy lifting has been done with the script installing Box86, Wine, and one of the VARAs then manually installing Vara FM is a breeze. A simple download and install through Wine. If you can install a program on Windows you'll be fine.?
Download the program, unzip it to your drive c sub-folder under the .Wine folder. In a terminal windows type wine uninstaller. Click install a program. Go to C drive. Double click the setup installer. Click box to make a Desktop shortcut. Done.
Thanks.? I see the app in there, bit I just noticed that it¡¯s VARA HF and I¡¯m actually looking for VARA FM.? And the scripts look a little intimidating to try to edit them to point to the VARA FM download and to change the calls for VARA HF to
VARA FM.
I might have to think through another way of accomplishing this.
Adam
?
I used "Pi-APPS" to install VARA and it worked great.
Denis, WB8SKP
On 2/14/2025 2:36 PM, Adam KM7N via wrote:
Greetings-
? ? I know the Build-a-Pi was orphaned for 73 Linux, but I have put a great dela of personalization into my current BaP setup on a Pi3.? I recently acquired a Pi4, which I know should give me the added benefit of being able to load VARA.? So, I simply
moved my SD card from my Pi3 to my Pi4, but when I run the BaP updater to add VARA, it doesn't seem to recognize that I am now on a Pi4, and it won't let me add VARA.? Is this expected behavior?? Do I need to reload BaP (or switch to 73 Linux) and then go
through the process of rebuilding my BPQ node and configuring direwolf, etc???
?
Thanks for the help...
?
Adam, KM7N
|
If the heavy lifting has been done with the script installing Box86, Wine, and one of the VARAs then manually installing Vara FM is a breeze. A simple download and install through Wine. If you can install a program on Windows you'll be fine.?
Download the program, unzip it to your drive c sub-folder under the .Wine folder. In a terminal windows type wine uninstaller. Click install a program. Go to C drive. Double click the setup installer. Click box to make a Desktop shortcut. Done.
Thanks.? I see the app in there, bit I just noticed that it¡¯s VARA HF and I¡¯m actually looking for VARA FM.? And the scripts look a little intimidating to try to edit them to point to the VARA FM download and to change the calls for VARA HF to
VARA FM.
I might have to think through another way of accomplishing this.
Adam
?
I used "Pi-APPS" to install VARA and it worked great.
Denis, WB8SKP
On 2/14/2025 2:36 PM, Adam KM7N via wrote:
Greetings-
? ? I know the Build-a-Pi was orphaned for 73 Linux, but I have put a great dela of personalization into my current BaP setup on a Pi3.? I recently acquired a Pi4, which I know should give me the added benefit of being able to load VARA.? So, I simply
moved my SD card from my Pi3 to my Pi4, but when I run the BaP updater to add VARA, it doesn't seem to recognize that I am now on a Pi4, and it won't let me add VARA.? Is this expected behavior?? Do I need to reload BaP (or switch to 73 Linux) and then go
through the process of rebuilding my BPQ node and configuring direwolf, etc???
?
Thanks for the help...
?
Adam, KM7N
|
Thanks. ?I see the app in there, bit I just noticed that it¡¯s VARA HF and I¡¯m actually looking for VARA FM. ?And the scripts look a little intimidating to try to edit them to point to the VARA FM download and to change the calls for VARA HF to
VARA FM.
I might have to think through another way of accomplishing this.
Adam
toggle quoted message
Show quoted text
On Feb 15, 2025, at 06:52, Denis via groups.io <wb8skp@...> wrote:
?
I used "Pi-APPS" to install VARA and it worked great.
Denis, WB8SKP
On 2/14/2025 2:36 PM, Adam KM7N via groups.io wrote:
Greetings-
? ? I know the Build-a-Pi was orphaned for 73 Linux, but I have put a great dela of personalization into my current BaP setup on a Pi3.? I recently acquired a Pi4, which I know should give me the added benefit of being able to load VARA.? So, I simply
moved my SD card from my Pi3 to my Pi4, but when I run the BaP updater to add VARA, it doesn't seem to recognize that I am now on a Pi4, and it won't let me add VARA.? Is this expected behavior?? Do I need to reload BaP (or switch to 73 Linux) and then go
through the process of rebuilding my BPQ node and configuring direwolf, etc???
?
Thanks for the help...
?
Adam, KM7N
|
km4ack
Paul
Jeremy Pierce
DF6PA
Brian Dale