开云体育

Hello all, A local retailer is 'blowing-out' very low-spec Intel laptops: Intel Celeron N3450 4 core 1.1 GHz CPU 4 Gig RAM 64 Gig eMMC storage 11.6" color display (1366x768 resolution) 2.4 GHz WiFi

You should have enough wire now to shorten or lengthen to dial in SWR....mine is barely 1.2:1 across 40m. This efhw is a fantastic piece of kit. 73 de, KN4UNO [email protected]> wrote:

Installed everything today. Install went smoothly. WSJTX and CQRLOG were not installed. I installed CQRLOG 64 bit from the repository and it ran fine. WSJTX 2.5.4 from Source Forge will not install.

Hello, The thing to do when tuning an antenna is to take several SWR measurements across the band. Then look at the one with the lowest SWR and see what frequency it is at. With just one SWR

I rebuilt the transformer and now have a 1.86 SWR at 7.020. It is 2.1 at 14.030. Should I continue to mess with it? I have it up about 35 feet and slopes to 6 feet.

Are you concerned about VNC Viewer installing correctly, or VNC SERVER? Kevin -- KD9EFV

Build a Pi for Pi OS 64 bit is ready for testing. If you would like to test the beta version, follow the directions on the bottom of this page ( https://app.simplenote.com/publish/rP81CM ). -- 73, de

Choose the sound card with USB C media electronics in the name. It is the last one in the screenshot above. The rig is changing frequency because of your split setting in WSJTX. Change it to none and

well, when i get the decoding to work, the DT is no more that .2 off.? ?No problems before.? ?Its the audio settings in Pi that I dont know how to set correctly.

How should I get rid of multiple "screen" running at the same time? A reboot doesn't help. N4VIP -- 73 de N4VIP, Don - SFARES Inc. Treasurer

Sorry, this feature isn't available on the EES. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (

You shouldn't have multiple instances of BPQ running at the same time. There should only be one running. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

That should be a solid approach for saving your custom scripts. It is recommended that you start with a fresh flash of bullseye rather than trying to upgrade buster to bullseye. -- 73, de KM4ACK

Hi Doug...? a first step is to make sure that the time is set correctly on your pi4.? If the time is off too much, no decodes will work, and you will be unable to transmit. - Matt, WE1H

hi I am running a raspberry pi 4 with the build a pi.? I am having some difficulty with the decodes in wsjt-x and I havent been able to transmit anything.? ?I am using a G90 with a digirig mobile

Tried again portable today. Now it will not hold ptt for the hole time and it will change frequently on the radio when done. (From 14.078 and stayed on 14.077 and not go back to 14.078) I got a cq out

The Emergency Email Server is an excellent tool, but when supporting an Emergency Measures Organization, they need everything on the official ICS forms. Is there any way to make those forms available

On Sun, Feb 27, 2022, 7:28 AM km4ack <jason.oleham@...> wrote: > Looks like you have the wrong sound card selected. Look for one with > "codec" in the name and choose it. If it isn't obvious,

Jason, Many thanks for the outstanding Youtube on making a WL2K gateway with a Signalink and not a TNC.? I am developing an Emergency Communication System in Santa Fe, New Mexico and WL2K is a

I have a pi with buster installed to an ssd that I think i will move to bullseye. There are a lot of custom scripts in my home directory that I don't want to recreate and several of them are run from