开云体育

I installed Bullseye on a fresh sd card.? The only thing added was language configuration (German), Firefox and Thunderbird.? I then installed BAP from the github website.? I hope this is the most

Interesting. I don't have that result. I get a 'blank' if there isn't any GPS anywhere in my network, but no lock up. Please check out the latest documentation attached, with some modifications

I have tried Kevin's script on my test pi. Works fine when I have my IC705 connected using it's gps however the script locks up and kills conky when no gps is active. Ken WA8OMR

it repaired after second re-start....working now

Jason, I had updated the build-pi and now I have pat v2.5.0 and refuse the pat mailbox still...I ran your script and it did showed fix on port 5000. I restarted all over and still refusing. ???? jose

I have found that if you don't hit the 'OK' button before exiting the setup and configuration of FlDigi, FlRig, and wsjt-x, your settings won't be saved at all. Btw - any chance to add the original

Jason, Before you start your update of EES, I would like to put in a feature request. (Having EES reside in a subdirectory, either asking the user for the sub name or /var/www/html/ees This will make

If you upgrade to Bullseye you will likely notice that Conky is not comfortable on the right hand side of your VNC (and attached) monitor.? For some reason the screen size is changing randomly at

Thanks for the report Dave. This issue isn't specific to Bullseye. It can happen with any Pi OS version. Pat v 0.12.0 changed the location of the Pat Mailbox. I'll need to update the EES project to

I just refreshed my memory on how to run the EES and when I post an email, it never gets pushed to the PAT Outbox. Snip from CRONTab: #-----Start EES Server Options------ #Move EES email to Pat

Jason here the copy of the script i use from your moblinkd script . Thanks for all -- Loyd C. Headrick WX4LH <http://wx4lh.com>

Modded instructions to meet requests from the github issue: File with modded instructions ( https://github.com/km4ack/pi-build/issues/336#issuecomment-984292772 )

I have followed these steps successfully with Build-A-Pi 3.1.3 on Bullseye

All data is stored in /home/pi directory - especially /home/pi/.config? and /home/pi/.local/share , /home/pi/.tqsl You can transfer the needed configs from old SD card to the new one. -- 73 Daff,

I ended up creating a Bullseye SD card, booting from it, then doing a Raspberry Pi imager to the SDD.? I removed the SD card and rebooted off the SSD and started a complete rebuild. I found this:

Brilliant! I'll try this evening. R KQ9L ___________________________ Think different, Macintosh. ? This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein

Put the counterpoise on the ground of your radio...you can just lay it on the ground. [email protected]> wrote:

Sage advice gentleman, I'll put some ferrites on tonight. A tuned counterpoise will be more difficult as my EFHW transformer is by an upper floor window under the eave and with cold weather, not sure

Jason is spot on. In addition there's one other thing that helped me out with this. Connect a resonant counterpoise wire to your radio ground. Even if you have a station ground, DC grounds are often

Hi, I also would like to change Bullseye. What‘s my problem, how to get all the configuration data of the applications transferred from the old to the new system Vy 73 de Klaus DC2JR Von meinem