开云体育

Yes, sir, feel free to use it. My call sign is KD9EFV, name is Kevin. I am now in the process of switching over all my Pi's and VMs running Debian family OSs, even at home. If you would like, I can

Update- Everything Works!!! Thanks for all the spot-on advice. ’73 ?fer now best to you & yours. hope to catch you down the log. Rich N2WBJ

Thanks for the post and the script. I have created an issue ticket so I can investigate this in the future. https://github.com/km4ack/pi-build/issues/336 Are you ok with me using your code in the

The TNC3 uses channel 6 instead of the default (1). Change your rfcomm command to: sudo rfcomm connect /dev/rfcomm0 MAC_ADDR_HERE 6 Note the "6" at the end of the line. -- 73, de KM4ACK YouTube (

Run these commands from a terminal: sudo killall pat pat http and post any errors. The above commands stop pat from running in the background and restart pat manually. If you don't get errors, leave

Run these commands and post any errors: *sudo killall pat* *pat http* This will stop pat if it is running in the background and manually start it from the terminal. If it starts without errors, leave

I have other reports of issues with direwolf on Bullseye. I will be digging into this over the next few days to see if I can figure it out. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) |

That document is two years old and out of date. See the official Direwolf manual for compile instructions if you aren't using Build a Pi.

Report this to the YAAC group for the developer. He is usually very quick to respond. /g/yaac-users/topics -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

That is what I use with ( I hate to say it a full size keyboard and mouse with one USB dongle ) when I go out ... I do have a very small BT KB w/touch pad when I need to be lite weight =) -- *73's

I think my port showed up as 5000 in the PAT > Settings > Current but when I did a pat configure it was port 8080.? Changed it to 5000 there and stuff started working again.

Thanks for you help. The Old Version installed properly on the new PI OS, But the new OS did not see My IC-7300 USB Codec (Rig Control Worked Fine). I’m going to just Download the Old Buster OS &

I really like this solution, Loyd. Having the monitor power the Pi means a few less doodads to remember to bring with me when I go portable! Thanks for the suggestion! 73! Joe KB6WIJ

I just built a new system using a fresh install of Bullseye.? I tried several times using BAP updater but Direwolf does not install.? I managed to do an install from the command line, but it does

My port was originally set up at 5000. Ran that thing. Still is. Something isn't working though. It's broke. LOL.

Jason has a fix for this.? It is listed in this forum as a PAT V0.12 Port Issue if you have the Emergency Email Server installed.? What is happening is the PAT port is getting set to 8080 instead of

I've found this to be related to how the program is closed. If the window is closed vs program exited, seems to be the deciding factor in this behavior. Your mileage may vary. -- Glenn G. KA8DUX

Nope. Didn't help .[image: Screen Shot 2021-11-10 at 17.22.22 .png] [image: Screen Shot 2021-11-10 at 17.25.41 .png]

In Part "Raspberry Pi Build" I can't seem to get Direwolf installed. It can't get past the "make" command in the BAP instructions. I need some help here.

You can find Buster here: Lite version - https://downloads.raspberrypi.org/raspios_lite_armhf/images/raspios_lite_armhf-2021-05-28/ Full version -