开云体育

There was an API change in the latest gpsd which has caused issues with direwolf ( https://github.com/wb2osz/direwolf/issues/357 ) as well. We are waiting for the developers of other projects to

I found the gpsd ver 3.23.1 here: https://archlinuxarm.org/packages/arm/gpsd I unpacked it, but I don't know how to install it.? Please help. I don't know what to do about updating the xgps API from

I just installed the most recent BAP on a freshly installed pi.? Got no error messages.? Noticed no GPS on Conky.? Checked xgps and got following error: pi@david:~ $ xgps xgps: host localhost port

THe command?rigctld -m 4 starts the hamlib rig control in the foreground.? This provides a common framework or conduit for applications to interface between themselves and flrig.? It is used all

thanks bro its working now but what did you can you explain????

Thanks for that link, Jason. I see how it works now -- it seems that if I install *conky-all-1.10.8-1* I'll get just about all the functionality that conky can provide. I didn't think of the gps

Thank you. I figured out the RMS List use after I posted the question. I got brave and peaked under the hood by opening the script.I could follow most of the logic flow and found the section that

The ones that run at reboot probably need a delay in order for things to boot. You may have better luck with @reboot sleep 30 && /home/pi/bin/conky/grid however, this still may not be enough as the

Auto Pat uses the entire RMS gateway list. Range depends on a host of variables (band, time of day, antenna, etc) so it's hard to give you a direct answer. The distance that works during the day on

I just reread the post and I want to clarify a few things. First, I don't know how I got the ic-7300 hashtag in the topic. I don't think the radio type is relevant, but it's a Yaesu FT-747. Second, to

Hello, all! A couple of conky-related issues: I have the following entries in my crontab: # fetch solar indices and gridsquare for conky every hour @reboot /home/pi/bin/conky/grid @reboot

Thank you Jason!!! Thanks & 73. Jeff K3JRZ Email <K3JRZ.Jeff@...> ● YouTube <https://www.youtube.com/K3JRZOnTheAir> ● QRZ.com <https://www.qrz.com/db/K3JRZ> ● 100WAAW #404

Icons should be in /usr/local/share/pixmaps -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (

Thanks Mike

What is the connection list process? Does it only use the saved Alias list or does it use thedownloaded RMS Station list as the source? What range do you have the best connections for40m and 20m

Awesome, will try tonight! Is there a command to save after editing? R ___________________________ Think different, Macintosh. ? This e-mail, and any attachments thereto, is intended only for use by

boot directory look for config.txt open file look for # uncomment to force a specific HDMI mode (this will force VGA) #hdmi_group=1 #hdmi_mode=1 change to # uncomment to force a specific HDMI mode

The initial (:0) VNC session is most likely tied to the physical constraints of the computer's monitor.? Log in via ssh and start another VNC session: vncserver Then connect to that session with

Thank you for taking the time to reply, but again this isn't working as I cannot "access" that portion of the screen due to resolution issues. I'm gonna reinstall the entire BAP and do away with the

Main Pi Menu->Preferences->Screen Configuration -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (