开云体育

Here's a good resource for covering the holes https://www.goldmine-elec-products.com/prodinfo.asp?number=G24026

Thank you, Stan. That’s very clean. 73 de AG7TX David Thompson, AG7TX Jack of All Trades Master of None dbthompson@...

Here are the pictures if the inside!!

Alternatively, if you don't have the Pi set up to auto login and boot to the desktop on startup, then you will have to SSH into the Pi to log in to continue the boot up. You should then be able to

I have an older Netgear router, and it shows connected devices when it feels like, and leaves them off when it feels like. They all work, but they just don't show up in the list. I use a windows

I've set up several Pi 4s and 3s using a monitor and keyboard to do the setup, and then switching to headless by just unplugging the peripherals. They booted fine and VNC and SSH worked without

Hi Jason I did a re-install of BAP this afternoon and all the issues have gone away. CONKY is up and running as is VNC I'll stick with this for some days to ensure its robust. Thanks for your

Hey OM David; While I cannot DIRECTLY answer that question, I can clearly state that starting out Headless and Wireless (from the Get-Go) does allow you to convert back and forth from headless to

I'm still learning Groups.io and spent a little time looking, but can't find the answer to this question: When I setup my Pi4, I had it connected to monitor, keyboard, and mouse. Now I want to convert

Has anyone dealt with a rigblaster nomic and direwolf it wanting to keep the rig keyed up -- Sent from Yahoo Email App for Android

Jason, I am setting up with both a local screen and remote via VNC using a couple of different iPads. ?I was wondering if you have a strategy for changing the screen size to fit the different remote

It is a one inch hole. It is privacy window screen fabric. (It is not metal) It is secured with a little hot glue. ?At the fire station for my 24 hour shift, will snap some pictures of the inside

That was my original thought, and I even have some leftover black fiberglass window screen....I wish I would have done that instead hihi

Are you able to start conky from the ham radio category of the pi menu? If not, open the terminal and run *conky*. Post any error messages you see. Also, run *bash ~/pi-build/diagnostic* and follow

Stan, That looks really well executed. Is that window screen mesh painted black? Would you mind posting a photograph of the inside so we can see how you secured the mesh? That looks like about a

Nice video Bob. Very thoughtful. I looked at many 'single level' cases -- but when you need to incorporate a HAT, the choices are limited -- particularly for robust cases made from metal (Mazack,

Thanks, Mitch, I have two of them and so far all is well. ?I still need to adjust the fans a bit to optimize them. ?I have had no video issues. One of these will be used in the field and the other

That's right purtty, good work! ________________________________ Sent: Friday, August 21, 2020 10:02:22 AM To: [email protected] <[email protected]> Subject: Re: [KM4ACK-Pi] Case Options

Excellent video, Bob. I hope you have had greater luck with your Argon One case than I have! I ordered one direct from Argon40 back on 01 June as there wasn't any available on Amazon at the time. It

Bruce, all, I have been testing the Argon One Pi4 case from Argon40. ?It does not accommodate a HAT It runs all of the cables out the rear. ?I got the case on Amazon US for $25. I am fussing with