开云体育

In order for the changes to take effect, you either need to restart bpq, or reboot the Pi.

For reference, here is my bpq.cfg file.Hope this helps!

; Written by BPQConfigGen

SIMPLE
NODECALL=WB8ERJ-7
NODEALIAS=MFDSW1
LOCATOR=EN80SQ
FULL_CTEXT=1
IDINTERVAL=10
BTINTERVAL=30

NODE=1
BBS=1
OBSINIT=6
OBSMIN=1
NODESINTERVAL=60
L3TIMETOLIVE=25
L4RETRIES=3
L4TIMEOUT=60
PACLEN=236
T3=300
IDLETIME=1500
MAXLINKS=63
MAXNODES=512
MAXROUTES=64
MAXCIRCUITS=128
MINQUAL=100
HIDENODES=1
L4DELAY=10
L4WINDOW=4
AUTOSAVE=1
MAXRTT=90
MAXHOPS=5
SAVEMH=1
ENABLE_LINKED=A


; Network System Parameters:
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; in a received nodes broadcast. This value is then
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; decremented by 1 every NODESINTERVAL.
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; value that node's information is not included in
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; a subsequent nodes broadcast.
; INP3 Routing is experimental.? The two parms which follow will be ignored
; unless activated in the ROUTES: section.
;BUFFERS=255 ? ? ? ? ? ?; This parameter is no longer used in the Win32 version.
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; BPQ32 allocates an adequate number automatically.
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; I have the line commented out just to remind me it's gone!!

; TNC default parameters:
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; 236 is suitable for reliable and fast connections, such
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; as AX/IP/UDP or a dedicated 9600 RF Link
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; 120 is suitable for a typical shared VHF packet radio connection
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; PACLEN is defined for each port individually in the ports sections
TRANSDELAY=1 ? ? ? ? ? ?; Transparent node send delay in seconds

; Level 2 Parameters:
; T1 (FRACK), T2 (RESPTIME) and N2 (RETRIES) are now in the PORTS section

; Configuration Options:
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; require a 'N *' command to be displayed.
/*
The *** LINKED command is intended for use by gateway software, and concern
has been expressed that it could be misused. It is recommended that it be
disabled (=N) if unneeded.
*/
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; Y = allows unrestricted use
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; A = allows use by application program
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; N = disabled
;*


INFOMSG:
WB8ERJ's Winlink Gateway / BBS / Chat

****

IDMSG:
WB8ERJ-10 Winlink / RMS
WB8ERJ-1 BBS
WB8ERJ-5 chat
****

BTEXT:
WB8ERJ-10 Winlink / RMS
WB8ERJ-1 BBS
WB8ERJ-5 chat
WB8ERJ-7 node
****

CTEXT:
Type ? for list of available commands.
****

PORT
PORTNUM=1
?ID=Telnet Server
?DRIVER=TELNET
?CONFIG
? LOGGING=1
? TCPPORT=8010
? FBBPORT=8011
? HTTPPORT=8080
? SECURETELNET=1
? WL2KREPORT PUBLIC, , 80, WB8ERJ-10, EN80SQ, 00-23, 145030000, PKT1200, 8, 10, 1, 0
? CMS=1
? CMSCALL=WB8ERJ
? CMSPASS=xxxxxx
? USER=wb8erj,xxxxxx,WB8ERJ,,SYSOP;
ENDPORT

PORT
?PORTNUM=2
?ID=AXIP link : MFDSW2 : WB8ERJ-11
?DRIVER=BPQAXIP
?PACLEN=236
?FRACK=5000
?RESPTIME=1500
?MAXFRAME=4
?RETRIES=6
?QUALITY=255
?MINQUAL=70
?CONFIG
? BROADCAST NODES
? MHEARD ON
? UDP 10093
? MAP WB8ERJ-11 220-node UDP 10093 B

ENDPORT

PORT
?PORTNUM=3
?ID=145.030 MHz 1200 Baud
?TYPE=ASYNC
?PROTOCOL=KISS
?IPADDR=127.0.0.1
?TCPPORT=8001
?CHANNEL=A
?PACLEN=128
?TXDELAY=500
?FRACK=7000
?RESPTIME=1500
?MAXFRAME=4
?RETRIES=6
?QUALITY=193
?MINQUAL=70
?L3ONLY=0 ? ? ? ? ? ?; 1=No user downlink connects on this port
?NOKEEPALIVES=1
?DIGIFLAG=1 ? ? ? ? ? ?; Digipeat: 0=OFF, 1=ALL, 255=UI Only
?DIGIPORT=0 ? ? ? ? ? ?; Port # on which to send digi'd frames
?USERS=0 ? ? ? ? ? ? ? ?; Limit # of L2 sessions, 0 = no limit

?CONFIG
? BROADCAST NODES
MHEARD ON
ENDPORT


ROUTES:

KD8FTR-7,128,3
KC8WIT-7,245,3

****

APPLICATION 1,BBS,,WB8ERJ-1,MFDBBS,255
APPLICATION 2,CHAT,,WB8ERJ-5,MFDCHT,255
APPLICATION 3,RMS,C 1 CMS,WB8ERJ-10,MFDRMS,255


LINMAIL
LINCHAT