开云体育

I have saved the facebook post with pictures about the new LED. (See attached word doc.) I need to replace mine also. I searched Aliexpress but didn't find a source there at the time. Haven't searched

I have only a cursory experience with electronics hardware, so feel free to tell me I'm clueless. Would it be possible to hardwire the connection using thicker wire to remove any wiggle room from the

Larry, The wire wrap trick is something picked up in a previous incarnation as a TV repair guy in the mid to late 70s.? It's proven to be quite reliable, but for people repairing their own units,

I think this is what I’m going to do. Just solder the leads straight on. My units are from 25-30 years ago. And NOW I’m getting ready to repair a couple. Of course, the temptation is to

Thanks for the tips! I do remember fixing solder connections on the power supply, and possibly replacing some diodes, but that was a while ago... ;-)? The wire-wrap idea sounds good! I have tools,

Yep, that sounds like it might be the relay trying to connect and failing. But get responses from those on this list who can read schematics, as my information is anecdotal. Sent from my HAL 9000 in

Please pardon me for the ignorant question, but?does a faulty relay prevent the K1000 from?booting? ? My K1000?doesn't seem to complete the boot process. It powers up, then the?screen goes blank

Thanks. Sent from my HAL 9000 in transit to Jupiter

Will do update K1000.net. Not soon, but will do. Dennis

Let's get this on the website. And I'll start trying to find someone to do this on my units. Sent from my HAL 9000 in transit to Jupiter

Nicole, A suggestion on the P1 connector repair:? In manufacturing, the holes for P1 in the power supply board were drilled almost twice the diameter they should be (maybe originally to accommodate a

The two biggest issues with the modules are the P1 connector on the power supply and the relay. Turn the unit on. If nothing happens it's probably the P1. If you get black blocks it's likely to be the

I have these two Kurweil's that are less than perfect functioning. The keyboard has a stuck at full velocity key as well as inoperative 1/4 incj outputs. The rack K1000 PX Plus is not powering up any

Remove http from link on home page as it is implied ! Where will files appear ?

Thank you Max, for getting this started. Maybe, over the winter, I can get my 1000PX working again. Having a group gives me a bit of inspiration! peace, Frank Dickinson 90 East Productions

As nostalgia or coincidence I'm about to shovel out and go to work in Waltham right past & next to the old Waverly Oaks Waltham Kurzweil Music location (Kurzweil Edu Sys still there). In the mid late

There are several ways to do this. The info on K1000.net is usable but somewhat obsolete, now that direct replacement LED backlit or OLED modules are available. These don't require any modification to

I think there have been some newer sources for a display replacement for the keyboards that were posted recently on the old Yahoo group or perhaps the Facebook page but I may not have updated

Look to K1000.net for multiple ways to do this. Sent from my HAL 9000 in transit to Jupiter

hope someone reposts the info on upgrading fixing a fading led light on a K 1000 keyboard. Sooner or later I have to get this done!