开云体育

Hi Berndt - to explain - you take the empty weight of the vessel and multiply it by the cost per kg to get the total cost of materials, ditto for length and build time. i did a quick spreadsheet using

If you want more restrained accomodation and assymetric hulls then maybe an open version of the KD 112 would work?

Thank you for telling me. I have corrected it. But Verizon is slow with uploading web pages, so be patient. The boat will be about 15 % faster as the DUO 480C Cheers Bernd

That is better. In soft wood, it looks okay. But with plywood, the result is not this good. As I was building the Cataproa I used the stables for the first time. I was with Pepijn. As he mentioned he

Hi Ivan Interessant but confusing. Cost per m-$1476.30 what does this mean?? The others are even more confusing. Because it is very interesting for many people, so can you explain? Cheers Bernd

Hi Rod is the only clamps and screws solution. The screws, I use the smaller 2x2.5mm and 3x2.5mm. From my experience, when I am about to screw in the screws on the panel I insert it, take it out

Bernd, your link to the Eco 520 isn't working on your website. Also, do you have sailing speed estimates for this? How will it do compared to the Duo 480C?

Whoops - I will try to remember to convert iPhone photos to jpeg. Here are the converted files. And yes, As Bernd has pointed out, clamps and screws will still ?be necessary to position panels so I

Its still too early for photos - at the moment I am coating a few panels and working on bulkheads. I have finally found a heated workshop which will be available July 1. I will do my best to post

Small Craft advisor magazine Nov - Dec 2021 issue have published the results of their amateur boat building survey. Some that might be of interest is the cost of building which are as follows: Cost

Hi Rod The problem with the hand-operated stable is that it is difficult to operate them over a longer time. As you mentioned, stables can not be used for any procedure. To position parts, screws or

Another option for composite brads is: https://www.polymerfasteners.com/omer-tackers <https://www.polymerfasteners.com/omer-tackers> A bit expensive but working ok. I used it to hold the 8mm panels on

Here is an early review of the Rapter stapler and the composite staples offered by Duckworks. The stapler just arrived after a brief backorder wait and I was interested to see how it operates. This is

Love to see some pics!

Thanks for the update. Finding a suitable work space is today a problemAnyway, have fun Bernd

Hi Bernd, the track is 590 km but everything went ok. It was also a test to understand how to transport the boat ... I am building a 10.80 MT wing mast and I think it will be ready by the end of the

Who was the gentleman from Saskatchewan doing a eco 6 build?

Well. The adage is 'begin with the end in mind'. So nothing special happened, got some quotes from plywood suppliers, we are organising missing tools, cleaning our building container...get all the

Chiao Domenico A wise decision. Some distance from Puglia to Sizily. How many kilometers? I like your mythological comparison. I get your drift. There is a big difference between the KD 122 and the

Hi Bernd I transported the Duo 900 to the same shed where the KD122 is, so as to alternate work on both boats. From my home (Puglia) in southern Calabria road transport of the Duo 900 everything is