开云体育

I know. I built my Cataproa partly in this way. I was hoping you have found a reasonably priced gun Thanks anyway Bernd And yes please, next time some photos from the whole boat ;-))

It s from RAPTOR nail and crown They sell nail composite ,able to sand,cut and stain its , Like 4 year a go I look for that but Need the gun and not cheap! Envoyé depuis mon appareil Galaxy

What I wanted to ask you for a long time. What tool did you use to apply the plastic cramps? They save a lot of time. Cheers Bernd

Hi Robert Congratulations on your ECO 550 catamaran. You made a nice first trip. There are no photos that show the whole boat. You made some interesting things. Like the mast step. See I it right, you

Hi Dale, I guess you read one of my posts. I just finished building my ECO 550 in Hungary and have made my maiden voyage on lake Balaton ;-) If you're interested in seeing my boat, just contact me so

The following photos have been uploaded to the ECO 550 sailing in Hungary ( /g/K-designs-Multihull-Sailboats/album?id=275294 ) album of the [email protected]

Robert Twiss <swiftrider4@...> added the album ECO 550 sailing in Hungary

I do not understand about the transom issue. As mentioned, normally your changes are sensible and you have good taste. But, I had made the roof a bit longer. This wooden pillar looks like "hu we need

It s nice and like the idea of the Brass plate !!! And yes sometime we see thing from other point of view, you have lot of building in background to come with solution, It s is great job and fast

Thanks Bart, I hope you find a good place to work soon ;-) Ciao

We had thought of putting two stainless steel pipes close together with support on the cockpit, but they fall a little towards the inside. The inclination of the pillar is necessary not to place

Very nice work Domenico !! The photos give a very good impression.? I'm still searching for a place to work. Not easy in an overpopulated place like Belgium.

Hi Domenico This wooden pillar for the sundeck is out of proportion in my view. When you use instead a? stainless steel pipe it would look a lot better. My view only Cheers Bernd

Hi Bernd For the sundeck, the first idea was two but then we opted for only one in the center, inclined like the transom. With the boat at anchor, you can install curtains which will then be removed

Hi Domenico Again big progress. Looks really great.You have good taste. But, I am wondering about the support of the sundeck.It is ugly! Sorry, can you change it to a say stainless steel tube support?

Thanks Jack. ;-) Ciao

What a beauty!!!! Regards, Jack

Hello Bernd other photos of the KD122 Italy, almost at the end it is shortly ... Link foto /g/K-designs-Multihull-Sailboats/album?p=Taken%2C%2C%2C20%2C1%2C100%2C0&jump=1&id=269251

Hi Bernd As for the Duo 900, there was an agreement between me and the customer, an exchange. They decided to buy the KD 860 from me and the Duo remained with me. Now I have decided to transfer the

Hell Domenico I see, what is the plan? When will you finish the DUO 900? I was expecting that the customer would sail the boat this season. Cheers Bernd