开云体育

Hello Bernd and the whole forum I had the boat moved to Puglia I assembled the boat and tested the wing mast to take measurements of the 3 stainless steel cables. These are the latest photos of the

In reply to the question about finishing with fiberglass and resin, this my method. Drape, or spread the fiberglass cloth over the dry substrate, and if necessary for large surfaces tape into place

I have never used peel-ply and have only built one boat, but I did learn a bunch during the build. When I payed my fiberglass I used a squeegee to spread it. This helps to ensure you don’t have

I see that ?bulkhead 2 through 5 outside edge is parallel to the centerline which makes the side 90 degrees to the deck. BH 1 the center line is 11 mm closer to the outside edge at the bottom. So it

Oh doG no! (On the saw/guide front..) I've found local cabinet shops quite amenable to running a few pieces through their planers and jointer for furniture projects in the past. A quality sixer of a

I have been building my first boat just small 3,5m sailboat as first practice build before taking on most likely eco 6. What is your best way of working with epoxy and fiberglass to get as close to

Hi Mark! The bulkheads for the Duo 480 adventure are also ready, but till today, it was really cold at the west coast of Germany, now it is the first 10 degrees above thero day:) Cheers Harald

Thanks, Bernd. I’m excited to get it built and do some camp cruising with it. -Mark

Bryan, thanks for the info. I have read your entire build blog and found it very helpful to see the parts in real life vs. just on the drawings. This is my second boat build so I am not a complete

Hi Mark, I'm pleased to hear there is another 480 on the way. it is a great little boat for minimalistic cruising, very dry to sail and a lot of fun. Just regarding the points you raised, as Bernd

Hi Mark Nice to hear that you have started. When you have made the bulkheads BH2 and 3 to the sheer height, it is okay. There is enough gluing area for the beams without the upper pieces for the

I cut out 2 bulkheads today so I guess I’ve officially started my build. I bought the plans a couple weeks ago and I have been gathering materials. I have a couple questions about the plans. Am I

Welcome,?My plan is kd860o. let us look forward to it together. -- in PH

Yes, you are right. This is why I mentioned, "Many of my designs can be..."

Some of link not work Envoyé à partir de Courrier<https://go.microsoft.com/fwlink/?LinkId=550986> pour Windows ________________________________ De : [email protected]

GREAT!!! Envoyé à partir de Courrier<https://go.microsoft.com/fwlink/?LinkId=550986> pour Windows ________________________________ De : [email protected]

http://ikarus342000.org/DESIGNS.html (

I keep my fingers crossed for your migration. Link I posted shows old (archived) versions of your web site. Only for impatient people ... :) From your link I can not access designs details. On this

https://duckworks.com/bernd-kohler/ Hi All Dont forget Bernd's plans are on Duckworks as above cheers Bryan

Changing back to the not original providers. Yahoo sold the web part to another company. They have another input system that does not allow direct HTML editing. The new provider does not accept the