开云体育

would like the gerbers for the board..I can get some made. n2aie at arrl dot net N2AIE Vince

It should be worth it once the bugs are down to a minimum.. there are alot of uBITX kits out there... I still have the 49er..pieces ready to get going as well..with the article in QST doing the same

Will the circuit definitely need a pc or could it be done on something like prototype board? I am in the Uk so might it be easier to construct it from a circuit diagram? Keith M6 OLP

Jack Would you have the PCB's available for pick up at FDIM? Thanks Eric KC3GDV [email protected]> wrote:

You're right. It has consumed about 10hr/day, 24-7, for the past 18 months. I've learned a lot, and even though I've spent thousands on it which I doubt that I'll ever recoup, it's been a great

Jack, Was out of country for a few weeks and lost track of this. Is it still the plan to provide this board (the comment this morning about the dead 7" reminded me of this). Thanks for everything you

This is true, and is the third time our site's been hacked. We are adding yet another security package and are "assured" by our ISP that the new software will take care of it. FOr now, stay away until

that is what i had and thought the display had failed but it turned out to be a compiler error.? well programming error really. try a new copy of the software and see what happens. dave k7da

Dave, The display worked for a few weeks...then black. the teensy is still good...no issues there. vince n2aie

I also want to thank Jack and Al for a kewl project..I'm hoping that I can finally get things going.? trying some workarounds with the supply for display and have to wait for a replacement display.

i also had a blank screen.? but what i found was some change in compiling the code. go back and download and compile a known good copy of say .95 without making any changes and see what that does.?

Yes, unfortunately BuyDisplay post-sale support sucks. We've had several displays go bad and they "test them" and say they are fine. Al does have the Gerbers for the protection board and I'm sure he'd

So it seems that the 3.3 v on board(jackAl) regulator took a dump, even with all heat sink and fan (cool to touch heatsink)..and probably sent the 12 volts to the display.. this caused the display to

which pins are for the touchscreen? dave k7da

Different lines are used for the touch screen. This allows you to use the display w/wo touch. Check your wiring to the display. I'll pass this to Al to see if he has any ideas. Jack, W8TEE

Jack does the touchscreen use the same data path as the viewing screen?? i ask because i get no response when trying to do the calibration routine.? is it possible to see the data somewhere in the

All: Although our site has been restored with new security software, some of you have expressed concern about the site. We understand this completely. On the other hand, many of you want to download

In the next couple of days, I'll move copies to the site. We've installed new security software on the site and think that will take care of it.? Jack, W8TEE

I am ready to buy a board but am not pursuaded that the JackAl web pages are safe. Why not use [email protected]/Files?to keep a folder for each of the build documents and previous revisions.?

All: I'm not sure when it started again, but I checked last night at around 1AM and it was okay. Not so now. Stay away from our site, hamradiodesigns.com, until we finish putting in new security