开云体育

With the exception of one ground connection none of these pins have any connection on the JackAl board. Mike K5ESS

Jack, Thanks for the response.? I did go through the board files and did see that those are not connected in any way. Thanks again for the response so quickly. Vince n2aie.

I have no knowledge of what those pins are connected to on the JackAl board. Just commented on what the pins were for. rOn

Thanks Ron, Just to clarify in case I wasn’t clear, my question is: If I were connect these unused ports on the teensy to the jackal board through holes, would it cause any problem? I want to make

Pin definitions at: https://www.pjrc.com/teensy/pinout.html One of the pins is for a coin battery to keep TOD clock running when powered down. rOn

Jack, Just want to make sure it would not cause any issue if I did in fact make these connections with the teensy board? I’m guessing not but sometimes I’m a bad guesser. Jim Zdunic KM4TXR

They are not used. Originally we thought we might bring those out, but we did not. You can ignore them. Jack, W8TEE

Jack, could you answer where i can find this info? or could you answer? Thanks Vince n2aie

mike thanks.? that fixes. ? the problem i was having daave k7da

Thanks, Mike...looks good. Jack, W8TEE

Here in pdf form. I think the picture overlay(s) are fixed. Mike K5ESS Sent: Tuesday, February 12, 2019 3:58 PM To: [email protected] Subject: [JackAl] docx docs sir jack this is not meant to be a

yes but it looks just like the docx print dave

Does Lebreoffice writer have an option to convert or export a docx file to a pdf?

I'm using 4 pin mini XLR for the mic and it would be easy to add later as you suggested. -- *Lee - N9LO* *"I Void Warranties"*

sir jack this is not meant to be a whine. the program i have for viewing these docs is Lebreoffice writer and it is not rendering the docx docs correctly.? mostly just the pics which are overwriting

I think you'll find the JackAl has enough drive for you. I would try it that way. If that doesn't work, you can always retro fit it. Jack, W8TEE

I am building a desk microphone from a old flex neck LED desk lamp to use with my JackAl radio I am building.? I do not want to stick it close to my mouth when talking but talk towards it.? Does the

Thanks Jack, _____ From: [email protected] [mailto:[email protected]] On Behalf Of jjpurdum via Groups.Io Sent: Monday, February 11, 2019 4:12 PM To: [email protected] Subject: Re: [JackAl] USB-LSB

Rick: We are aware of the encoder transition problem. That's on my todo list and I hope to have that fixed in the next release. No, both VFO's should work with ALS. That's a new one as I never noticed

Hi Jack, JackAl V095 Just wondering if others are seeing this action? When changing bands with the encoder Clk1 will transition as it is supposed to from 33.....MHz to 56....MHz above 10Mhz (freq