I have no knowledge of what those pins are connected to on the JackAl board. Just
commented on what the pins were for.
rOn
toggle quoted message
Show quoted text
On February 14, 2019 at 12:35 PM James Zdunic <james_zdunic@...> wrote:
Thanks Ron,
Just to clarify in case I wasn¡¯t clear, my question is: If I were connect these unused ports on the teensy to the jackal board through holes, would it cause any problem?
I want to make sure there are no residual circuits on the jackal board that could cause trouble.
Jim KM4TXR
On Feb 14, 2019, at 12:20 PM, Ronald Pfeiffer <w2ctx@...> wrote:
Pin definitions at:
One of the pins is for a coin battery to keep TOD clock running when powered down.
rOn
On February 14, 2019 at 12:09 PM James Zdunic <james_zdunic@...> wrote:
Jack,
Just want to make sure it would not cause any issue if I did in fact make these connections with the teensy board? I¡¯m guessing not but sometimes I¡¯m a bad guesser.
Jim Zdunic KM4TXR
On Feb 14, 2019, at 11:31 AM, jjpurdum via Groups.Io <jjpurdum@...<mailto:jjpurdum@...>> wrote:
They are not used. Originally we thought we might bring those out, but we did not. You can ignore them.
Jack, W8TEE
On Thursday, February 14, 2019, 11:26:41 AM EST, Vince Loschiavo <vince320@...<mailto:vince320@...>> wrote:
<Teensy sockets.PNG>
Jack, could you answer where i can find this info? or could you answer?
Thanks
Vince
n2aie
