I ordered one on Jan 1 and received it on Jan 17.
I used PayPal and got a tracking number on Jan 14.
|
We're rewriting that part of the assembly manual, with new pixs, and hope to have it done by Monday.
Jack, W8TEE
On Friday, March 29, 2019, 1:05:12 PM EDT, Guy <sgbridge@...> wrote:
Can someone help me with Figure 2-13 Audio Wiring Harness in JackAl user manual?
Section 2.?
What I need is the pinout for J11 ICD 2x3.?
Specifically pin 1. ?Thanks !
Regards,
Guy WB7SZI?
|
Can someone help me with Figure 2-13 Audio Wiring Harness in JackAl user manual?
Section 2.?
What I need is the pinout for J11 ICD 2x3.?
Specifically pin 1. ?Thanks !
Regards,
Guy WB7SZI?
|
Johannes:
QRP Guys stacks the orders for a single delivery day each week. This means you might lose 7 days right there. Then there is shipping to Germany, plus the delay through Customs, and finally local delivery within Germany. I'm assuming you ordered on March 19 (Not May 19), so it's only been 10 days. QRP Guys are extremely reliable, so I'm certain you will get your board soon.
Jack, W8TEE
On Friday, March 29, 2019, 9:03:44 AM EDT, Johannes Pammer <pammer.johannes@...> wrote:
Hello,
is there any bropleme in the delivery?
I bought a jackai on 19.05.2019.
I have not received any shipping confirmation yet.
How long does it take normally?
Thank you
ps translated to Google, I speak German
|
Hello,
Is there any bropleme in the delivery? I bought a jackai on 19.05.2019. I have not received any shipping confirmation yet. How long does it take normally?
Thank you
Sorry for my English
on 19.05.2019. I have not received any shipping confirmation yet. How long does it take normally?
Thank you
ps translated to Google
|
Re: Enclosure for 7" JackAl Display
My first apartment was smaller than this...
Jack, W8TEE
On Thursday, March 28, 2019, 6:44:38 PM EDT, Scotty Hicks <Scotty@...> wrote:
I decided to order this one as it seems to have plenty of room for the display and all knobs and switches, etc.
?
320mm x 270mm x 120mm
?
Scotty – W5CCU
?
From: [email protected] [mailto:[email protected]]
On Behalf Of Lee via Groups.Io
Sent: Thursday, March 28, 2019 4:04 PM
To: [email protected]
Subject: Re: [JackAl] Enclosure for 7" JackAl Display
?
I am building mine in this.? 7" display to the left and rooms for knobs, mic and key jack along with AGC and power switch after removing the handle. Just barely fits. ? 270 x 140 x 210mm.?
--
Lee - N9LO
"I Void Warranties"
|
Re: Enclosure for 7" JackAl Display
I decided to order this one as it seems to have plenty of room for the display and all knobs and switches, etc.
?
320mm x 270mm x 120mm
?
Scotty – W5CCU
?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]]
On Behalf Of Lee via Groups.Io
Sent: Thursday, March 28, 2019 4:04 PM
To: [email protected]
Subject: Re: [JackAl] Enclosure for 7" JackAl Display
?
I am building mine in this.? 7" display to the left and rooms for knobs, mic and key jack along with AGC and power switch after removing the handle. Just barely fits. ? 270 x 140 x 210mm.?
--
Lee - N9LO
"I Void Warranties"
|
Re: Enclosure for 7" JackAl Display
I am building mine in this.? 7" display to the left and rooms for knobs, mic and key jack along with AGC and power switch after removing the handle. Just barely fits. ? 270 x 140 x 210mm.?  --
Lee - N9LO
"I Void Warranties"
|
In which document do these figures appear?
Jack, W8TEE
On Wednesday, March 27, 2019, 12:18:57 PM EDT, f1apy - Jacques <f1apy@...> wrote:
Hello group, ? I noticed a problem in the wiring diagram of the encoders, fig 2-29 and 2-30, on figure 2-30 it misses a wire between J11 and "CL" of the tuning encoder, would it be possible to correct in the new doc? at the same time specify the pin 1 of the J11 socket on fig 2-30. thank you very much for the work done. Vy 73’s de Jacques – F1APY
|
Hello, Sorry for the noise on the reflector, I don’t view that my doc is not the last, please cancel my previous mail 73’s de Jacques-F1APY ?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]] On Behalf Of f1apy - Jacques
Sent: Wednesday, March 27, 2019 5:19 PM
To: [email protected]
Subject: [JackAl] schematics again :-)? Hello group, ? I noticed a problem in the wiring diagram of the encoders, fig 2-29 and 2-30, on figure 2-30 it misses a wire between J11 and "CL" of the tuning encoder, would it be possible to correct in the new doc? at the same time specify the pin 1 of the J11 socket on fig 2-30. thank you very much for the work done. Vy 73’s de Jacques – F1APY
|
Re: USB Connected- NoAudio-Solved
Jack,
No, The problem of no audio only happened when I plugged in
the USB cable from the Teensy, it would kill the audio within a second or so in
the default filter setting (had not at that time thought about selecting another
filter selection as was trying to figure out why the audio quit).? It was
kind of interesting in the fact that with the radio off and the cable plugged in
as you turned the power on to the radio you would get a second or less of audio
and then silence until the USB was unplugged and the power cycled.? Once I
discovered the filter selection options, described earlier,?I could go from
power on no audio to audio.? Also just discovered the Notch Filter seems to
be working but no cursor or indication as to where you are tuning from or to. By
accident had a tone displayed and moved the ALC knob and was able remove the
tone as I tuned the ALC back and forth but no indication of where I was starting
from.? Must have been close because saw the hump go away and tone disappear
with less than one full revolution of the ALC.?
?
Rick,
KN4AIE
toggle quoted message
Show quoted text
Hi Rick:
Thanks for taking the time to tell us about this. I am curious: If you ran
the JackAl with the USB cable not attached, did you still have the same problem
with the filters?
Jack, W8TEE
On Wednesday, March 27, 2019, 10:55:12 AM EDT, Rick Price
<rickprice48@...> wrote:
Jack,
The problem turned out to be in
the IDE and Windows 10.? I had originally set the IDE to communicate with
the Teensy using Raw HID as that was what Win10 first identified it as and in
the IDE selected Raw Hid.?That worked OK for programming with the
IDE.? Somewhere along the line in the last several months Windows 10
updates decided to emulate a serial port under the Port selection for the Teensy
and dropped Raw Hid (COM4 sometimes COM6 depending on plug-in position in the
computer.).? I also read on someone's message to you?where they were
selecting "All of the Above" for USB type and not?hearing
anything?negative?I?too?selected?that?option which?may still
be?OK. The Teensy programmed fine with these settings except for the
audio?interference leaving hooked up after programming.? Last night
remembering the "Raw Hid" setting in the IDE I reset it and selected "Raw Hid"
for USB type and?deselected "All?of the Above". When I plugged the USB
cable back in the Teensy identified itself with the raw hid and pid # as a port
selection.? With this setting the USB cable plugged in?no longer
interferes with the "Filter" settings and "no audio" as described earlier.?
I also verified that I am still able to reprogram the Teensy from the IDE.
Windows 10 updates can be a pain!?Sorry to have bothered you but knowing
that no one else had reported the problem and you were not
experiencing?that issue allowed me to?just dig deeper.? Of course
not being able to use??a COM Port?selection?may be an issue
later with CAT implementation?and WSJT-X.? Cross that bridge when I
come to it!???
Rick KN4AIE
Yours is the first report of the filters not working. We'll take a look,
but since our are working, about the best we can do is guess what might go
wrong.
Jack, W8TEE
On Tuesday, March 26, 2019, 4:57:03 PM EDT, Rick Price
<rickprice48@...> wrote:
The trace has been cut since day one. I also
have problems with the notch filter not working.? When I select it the
notch screen comes up but neither rotary has any effect on the notch. Maybe
there is an issue in compiling the sketch although the one or two warnings I
receive are what others report and what you have explained prior. This is a
mystery! This is also a new teensy?and audio adapter (3rd pair, first set
just stopped working altogether, thought there might be a problem with the 2nd
set so ordered a 3rd set, getting a little expensive.)? I'll try retry the
old teensy and flip flop audio adapters and see what happens and report
back.
Glad yours don't behave that way so there must
be something in mine causing it.? Wonder if you could publish a list of
features not working or with bugs might help with the chasing of rabbits down
non-existent holes. Thanks for the reply.
?
Rick KN4AIE
Ours do not behave this way. We regularly test with the UXB cable attach,
but monitor the JackAl audio out. Did you cut the trace on the bottom of the
Teensy?
Jack, W8TEE
On Tuesday, March 26, 2019, 11:10:31 AM EDT, Rick Price
<rickprice48@...> wrote:
Jack,
JAckAlV095
Another bug that you are probably already
aware of but thought I would pass it by you.? Discovered it while using the
debug monitor.
With the USB connected to the computer the JackAl
audio will turn off except as noted below with these filter settings.
SSB Filter- audio on only with filter NONE selected
CW
Filter- audio on with filter 150, 300, 400, NONE.? Audio off with 600,
CUST
Could not figure out why when I plugged in the USB the JackAl
audio quit until I accidently selected NONE on the filter. Second Teensy audio
board does the same thing.? The ubitx audio out was unaffected with the USB
plugged in. I was trying to troubleshoot because I eventually want to use CAT
with FT8/WSJT-X, USB plugged in all the time.
Rick
KN4AIE?
|
Hello group, ? I noticed a problem in the wiring diagram of the encoders, fig 2-29 and 2-30, on figure 2-30 it misses a wire between J11 and "CL" of the tuning encoder, would it be possible to correct in the new doc? at the same time specify the pin 1 of the J11 socket on fig 2-30. thank you very much for the work done. Vy 73’s de Jacques – F1APY
|
Re: USB Connected- NoAudio-Solved
Hi Rick:
Thanks for taking the time to tell us about this. I am curious: If you ran the JackAl with the USB cable not attached, did you still have the same problem with the filters?
Jack, W8TEE
On Wednesday, March 27, 2019, 10:55:12 AM EDT, Rick Price <rickprice48@...> wrote:
Jack,
The problem turned out to be in the IDE and Windows
10.? I had originally set the IDE to communicate with the Teensy using Raw
HID as that was what Win10 first identified it as and in the IDE selected Raw
Hid.?That worked OK for programming with the IDE.? Somewhere along the
line in the last several months Windows 10 updates decided to emulate a serial
port under the Port selection for the Teensy and dropped Raw Hid (COM4 sometimes
COM6 depending on plug-in position in the computer.).? I also read on
someone's message to you?where they were selecting "All of the Above" for
USB type and not?hearing
anything?negative?I?too?selected?that?option which?may still be?OK. The Teensy programmed
fine with these settings except for the audio?interference leaving hooked
up after programming.? Last night remembering the "Raw Hid" setting in the
IDE I reset it and selected "Raw Hid" for USB type and?deselected
"All?of the Above". When I plugged the USB cable back in the Teensy
identified itself with the raw hid and pid # as a port selection.? With
this setting the USB cable plugged in?no longer interferes with the
"Filter" settings and "no audio" as described earlier.? I also verified
that I am still able to reprogram the Teensy from the IDE. Windows 10 updates
can be a pain!?Sorry to have bothered you but knowing that no one else had
reported the problem and you were not experiencing?that issue allowed me
to?just dig deeper.? Of course not being able to use??a COM
Port?selection?may be an issue later with CAT implementation?and
WSJT-X.? Cross that bridge when I come to it!???
Rick KN4AIE
Yours is the first report of the filters not working. We'll take a look,
but since our are working, about the best we can do is guess what might go
wrong.
Jack, W8TEE
On Tuesday, March 26, 2019, 4:57:03 PM EDT, Rick Price
<rickprice48@...> wrote:
The trace has been cut since day one. I also have problems with the
notch filter not working.? When I select it the notch screen comes up but
neither rotary has any effect on the notch. Maybe there is an issue in compiling
the sketch although the one or two warnings I receive are what others report and
what you have explained prior. This is a mystery! This is also a new
teensy?and audio adapter (3rd pair, first set just stopped working
altogether, thought there might be a problem with the 2nd set so ordered a 3rd
set, getting a little expensive.)? I'll try retry the old teensy and flip
flop audio adapters and see what happens and report back.
Glad yours don't behave that way so there must be something in mine
causing it.? Wonder if you could publish a list of features not working or
with bugs might help with the chasing of rabbits down non-existent holes. Thanks
for the reply.
?
Rick KN4AIE
Ours do not behave this way. We regularly test with the UXB cable attach,
but monitor the JackAl audio out. Did you cut the trace on the bottom of the
Teensy?
Jack, W8TEE
On Tuesday, March 26, 2019, 11:10:31 AM EDT, Rick Price
<rickprice48@...> wrote:
Jack,
JAckAlV095
Another bug that you are probably already
aware of but thought I would pass it by you.? Discovered it while using the
debug monitor.
With the USB connected to the computer the JackAl
audio will turn off except as noted below with these filter settings.
SSB Filter- audio on only with filter NONE selected
CW
Filter- audio on with filter 150, 300, 400, NONE.? Audio off with 600,
CUST
Could not figure out why when I plugged in the USB the JackAl
audio quit until I accidently selected NONE on the filter. Second Teensy audio
board does the same thing.? The ubitx audio out was unaffected with the USB
plugged in. I was trying to troubleshoot because I eventually want to use CAT
with FT8/WSJT-X, USB plugged in all the time.
Rick
KN4AIE?
|
Re: USB Connected- NoAudio-Solved
Jack,
The problem turned out to be in the IDE and Windows
10.? I had originally set the IDE to communicate with the Teensy using Raw
HID as that was what Win10 first identified it as and in the IDE selected Raw
Hid.?That worked OK for programming with the IDE.? Somewhere along the
line in the last several months Windows 10 updates decided to emulate a serial
port under the Port selection for the Teensy and dropped Raw Hid (COM4 sometimes
COM6 depending on plug-in position in the computer.).? I also read on
someone's message to you?where they were selecting "All of the Above" for
USB type and not?hearing
anything?negative?I?too?selected?that?option which?may still be?OK. The Teensy programmed
fine with these settings except for the audio?interference leaving hooked
up after programming.? Last night remembering the "Raw Hid" setting in the
IDE I reset it and selected "Raw Hid" for USB type and?deselected
"All?of the Above". When I plugged the USB cable back in the Teensy
identified itself with the raw hid and pid # as a port selection.? With
this setting the USB cable plugged in?no longer interferes with the
"Filter" settings and "no audio" as described earlier.? I also verified
that I am still able to reprogram the Teensy from the IDE. Windows 10 updates
can be a pain!?Sorry to have bothered you but knowing that no one else had
reported the problem and you were not experiencing?that issue allowed me
to?just dig deeper.? Of course not being able to use??a COM
Port?selection?may be an issue later with CAT implementation?and
WSJT-X.? Cross that bridge when I come to it!???
Rick KN4AIE
toggle quoted message
Show quoted text
Yours is the first report of the filters not working. We'll take a look,
but since our are working, about the best we can do is guess what might go
wrong.
Jack, W8TEE
On Tuesday, March 26, 2019, 4:57:03 PM EDT, Rick Price
<rickprice48@...> wrote:
The trace has been cut since day one. I also have problems with the
notch filter not working.? When I select it the notch screen comes up but
neither rotary has any effect on the notch. Maybe there is an issue in compiling
the sketch although the one or two warnings I receive are what others report and
what you have explained prior. This is a mystery! This is also a new
teensy?and audio adapter (3rd pair, first set just stopped working
altogether, thought there might be a problem with the 2nd set so ordered a 3rd
set, getting a little expensive.)? I'll try retry the old teensy and flip
flop audio adapters and see what happens and report back.
Glad yours don't behave that way so there must be something in mine
causing it.? Wonder if you could publish a list of features not working or
with bugs might help with the chasing of rabbits down non-existent holes. Thanks
for the reply.
?
Rick KN4AIE
Ours do not behave this way. We regularly test with the UXB cable attach,
but monitor the JackAl audio out. Did you cut the trace on the bottom of the
Teensy?
Jack, W8TEE
On Tuesday, March 26, 2019, 11:10:31 AM EDT, Rick Price
<rickprice48@...> wrote:
Jack,
JAckAlV095
Another bug that you are probably already
aware of but thought I would pass it by you.? Discovered it while using the
debug monitor.
With the USB connected to the computer the JackAl
audio will turn off except as noted below with these filter settings.
SSB Filter- audio on only with filter NONE selected
CW
Filter- audio on with filter 150, 300, 400, NONE.? Audio off with 600,
CUST
Could not figure out why when I plugged in the USB the JackAl
audio quit until I accidently selected NONE on the filter. Second Teensy audio
board does the same thing.? The ubitx audio out was unaffected with the USB
plugged in. I was trying to troubleshoot because I eventually want to use CAT
with FT8/WSJT-X, USB plugged in all the time.
Rick
KN4AIE?
|
Re: Enclosure for 7" JackAl Display
Take a look here:
Jack, W8TEE
|
Re: Enclosure for 7" JackAl Display
This is one from Amazon:?
|
Re: USB Connected- NoAudio
Yours is the first report of the filters not working. We'll take a look, but since our are working, about the best we can do is guess what might go wrong.
Jack, W8TEE
On Tuesday, March 26, 2019, 4:57:03 PM EDT, Rick Price <rickprice48@...> wrote:
The trace has been cut since day one. I also have problems
with the notch filter not working.? When I select it the notch screen comes
up but neither rotary has any effect on the notch. Maybe there is an issue in
compiling the sketch although the one or two warnings I receive are what others
report and what you have explained prior. This is a mystery! This is also a new
teensy?and audio adapter (3rd pair, first set just stopped working
altogether, thought there might be a problem with the 2nd set so ordered a 3rd
set, getting a little expensive.)? I'll try retry the old teensy and flip
flop audio adapters and see what happens and report back.
Glad yours don't behave that way so there must be something in
mine causing it.? Wonder if you could publish a list of features not
working or with bugs might help with the chasing of rabbits down non-existent
holes. Thanks for the reply.
?
Rick KN4AIE
Ours do not behave this way. We regularly test with the UXB cable attach,
but monitor the JackAl audio out. Did you cut the trace on the bottom of the
Teensy?
Jack, W8TEE
On Tuesday, March 26, 2019, 11:10:31 AM EDT, Rick Price
<rickprice48@...> wrote:
Jack,
JAckAlV095
Another bug that you are
probably already aware of but thought I would pass it by you.? Discovered
it while using the debug monitor.
With the USB connected to the computer the
JackAl audio will turn off except as noted below with these filter
settings.
SSB Filter- audio on only with filter NONE selected
CW Filter-
audio on with filter 150, 300, 400, NONE.? Audio off with 600,
CUST
Could not figure out why when I plugged in the USB the JackAl audio quit
until I accidently selected NONE on the filter. Second Teensy audio board does
the same thing.? The ubitx audio out was unaffected with the USB plugged
in. I was trying to troubleshoot because I eventually want to use CAT with
FT8/WSJT-X, USB plugged in all the time.
Rick KN4AIE?
|
Enclosure for 7" JackAl Display
Has anyone found an enclosure of the Blue steel ebay variety that will fit the 7” display and have room for the rotary encoder with a large knob and the volume control, switches and mic and key jacks on the right side like AL’s 5” version.
?
Scotty, W5CCU
?
?
|
Enclosure for 7" JackAl display
Has anyone found an enclosure of the Blue steel ebay variety that will fit the 7” display and have room for the rotary encoder with a large knob and the volume control, switches and mic and key jacks on the right side like AL’s 5” version.
?
Scotty, W5CCU
?
|
Re: USB Connected- NoAudio
The trace has been cut since day one. I also have problems
with the notch filter not working.? When I select it the notch screen comes
up but neither rotary has any effect on the notch. Maybe there is an issue in
compiling the sketch although the one or two warnings I receive are what others
report and what you have explained prior. This is a mystery! This is also a new
teensy?and audio adapter (3rd pair, first set just stopped working
altogether, thought there might be a problem with the 2nd set so ordered a 3rd
set, getting a little expensive.)? I'll try retry the old teensy and flip
flop audio adapters and see what happens and report back.
Glad yours don't behave that way so there must be something in
mine causing it.? Wonder if you could publish a list of features not
working or with bugs might help with the chasing of rabbits down non-existent
holes. Thanks for the reply.
?
Rick KN4AIE
toggle quoted message
Show quoted text
Ours do not behave this way. We regularly test with the UXB cable attach,
but monitor the JackAl audio out. Did you cut the trace on the bottom of the
Teensy?
Jack, W8TEE
On Tuesday, March 26, 2019, 11:10:31 AM EDT, Rick Price
<rickprice48@...> wrote:
Jack,
JAckAlV095
Another bug that you are
probably already aware of but thought I would pass it by you.? Discovered
it while using the debug monitor.
With the USB connected to the computer the
JackAl audio will turn off except as noted below with these filter
settings.
SSB Filter- audio on only with filter NONE selected
CW Filter-
audio on with filter 150, 300, 400, NONE.? Audio off with 600,
CUST
Could not figure out why when I plugged in the USB the JackAl audio quit
until I accidently selected NONE on the filter. Second Teensy audio board does
the same thing.? The ubitx audio out was unaffected with the USB plugged
in. I was trying to troubleshoot because I eventually want to use CAT with
FT8/WSJT-X, USB plugged in all the time.
Rick KN4AIE?
|
George Baumann
jjpurdum
Guy
Lee