Dave Slotter, W3DJS,
Is The Sound Forge HamPi 3.1.1b2 version Have All of the Mods That You discuses with? Mike from Inovato? Especial The COmM 2-COM3 Or Will their Be a b3 vrsion?
I have installed The USB hub on The "BLUE" USB Since I am planning to install the GPS unit in One Of the Ports (Hoping To get FT8 Going) For Timing And Location functions.
Best Regard.
Steve AB2ET

Hi Andrew,

I have no idea about stand availability, sorry.

To answer your other question, when you flash the micro SD card and put it into the Quadra and restart it, HamIQ will automatically start up.

Does that answer your question?

On Thu, Nov 10, 2022, 12:04 PM Andrew <averacpa@...> wrote:

Saw your post regarding getting a 3-D printed stand from Mike.? Do you you if the stand will be made available for purchase?? I know the design file is available for free, but I don’t have a 3-D printer.

Also, once I flash HamIQ to a MicroSD card and install it into the device (which is on order), does the program boot up when I restart the machine or do I have to open it from the main menu?

Andrew

On Nov 10, 2022, at 11:43 AM, Dave Slotter, W3DJS <slotter@...> wrote:

Hi Don,

Yes, I had a productive phone conversation with Mike from Inovato yesterday. He mentioned that hams are roughly 1/3 of his customers. And he's very supportive of HamIQ which is my new name for HamPi for the Inovato Quadra. He's very excited to have our community's interest!

I spoke to Mike about the CPU throttling that happens during the extreme steps that the building of HamIQ puts the device through and so he's sending me a special 3-D printed fan attachment to help me cool down my device. He also extended technical support for me to build HamIQ, so I took the opportunity to ask a bunch of technical questions to understand the device better.

I also explained the importance of maintaining both USB 2 and USB 3 ports so that interoperability of radios would not be affected. For those who are not aware, I discovered quite some time ago that the USB cat control on some modern radios prefer USB 2 ports to USB 3.

HTH and 73,

On Thu, Nov 10, 2022, 11:28 AM Don--AE4DW <AE4DW.Don@...> wrote:

Has an invite to the group been extended to the Innovato folks? While they may not have any interest in amateur radio, what they see their product being used for may be of interest to them, along with, they might be a helpful resource for members here if we run into any challenging issues with their box.

--
-- Dave,?? ? ? ? ? ? ? ? ? ? ? ?Technical Specialist,??--
--?? Lifetime Member:?////?--
--??--

--
-- Dave,?? ? ? ? ? ? ? ? ? ? ? ?Technical Specialist,??--
--?? Lifetime Member:?////?--
--??--

Saw your post regarding getting a 3-D printed stand from Mike.? Do you you if the stand will be made available for purchase?? I know the design file is available for free, but I don’t have a 3-D printer.

Also, once I flash HamIQ to a MicroSD card and install it into the device (which is on order), does the program boot up when I restart the machine or do I have to open it from the main menu?

Andrew

On Nov 10, 2022, at 11:43 AM, Dave Slotter, W3DJS <slotter@...> wrote:

Hi Don,

Yes, I had a productive phone conversation with Mike from Inovato yesterday. He mentioned that hams are roughly 1/3 of his customers. And he's very supportive of HamIQ which is my new name for HamPi for the Inovato Quadra. He's very excited to have our community's interest!

I spoke to Mike about the CPU throttling that happens during the extreme steps that the building of HamIQ puts the device through and so he's sending me a special 3-D printed fan attachment to help me cool down my device. He also extended technical support for me to build HamIQ, so I took the opportunity to ask a bunch of technical questions to understand the device better.

I also explained the importance of maintaining both USB 2 and USB 3 ports so that interoperability of radios would not be affected. For those who are not aware, I discovered quite some time ago that the USB cat control on some modern radios prefer USB 2 ports to USB 3.

HTH and 73,

On Thu, Nov 10, 2022, 11:28 AM Don--AE4DW <AE4DW.Don@...> wrote:

Has an invite to the group been extended to the Innovato folks? While they may not have any interest in amateur radio, what they see their product being used for may be of interest to them, along with, they might be a helpful resource for members here if we run into any challenging issues with their box.

--
-- Dave,?? ? ? ? ? ? ? ? ? ? ? ?Technical Specialist,??--
--?? Lifetime Member:?////?--
--??--

Hello Tryg,

?

??????? I am currently using X11VNCServer and it works great.? But I had to install it.? I could not find any preinstalled VNC software on the HamIQ image.?

?

73’蝉

?

Herbert

K7HAD

?

?

From: [email protected] <[email protected]> On Behalf Of EI7CLB
Sent: Thursday, November 10, 2022 3:55 PM
To: [email protected]
Subject: [Inovato-Quadra-4-HamRadio] Headlessness or Remote viewing, controlling even

?

Is it possible to - or does a VNC server type arrangement exist in the Quadra? Is there a way of communicating with it? From a tablet or Chromebook. The form factor simply begs /P ops. TIA.
ATB, Tryg
--

Is it possible to - or does a VNC server type arrangement exist in the Quadra? The form factor simply begs /P ops.
ATB, Tryg
--

I was an early inovato Quadra adopter and promoter and am real glad it's caught on.

When the 3-D printed fan attachment file becomes available I'll ask one of the local Hams, with 3-D printers, to make me a couple of them.

I'm hoping to load HamIQ today as the rain from Nicole is keeping me indoors.

Innovation is fun!

David, KD4E

Hi Don,

Yes, I had a productive phone conversation with Mike from Inovato yesterday. He mentioned that hams are roughly 1/3 of his customers. And he's very supportive of HamIQ which is my new name for HamPi for the Inovato Quadra. He's very excited to have our community's interest!

I spoke to Mike about the CPU throttling that happens during the extreme steps that the building of HamIQ puts the device through and so he's sending me a special 3-D printed fan attachment to help me cool down my device. He also extended technical support for me to build HamIQ, so I took the opportunity to ask a bunch of technical questions to understand the device better.

I also explained the importance of maintaining both USB 2 and USB 3 ports so that interoperability of radios would not be affected. For those who are not aware, I discovered quite some time ago that the USB cat control on some modern radios prefer USB 2 ports to USB 3.

HTH and 73,

On Thu, Nov 10, 2022, 11:28 AM Don--AE4DW <AE4DW.Don@...> wrote:

Has an invite to the group been extended to the Innovato folks? While they may not have any interest in amateur radio, what they see their product being used for may be of interest to them, along with, they might be a helpful resource for members here if we run into any challenging issues with their box.

--
-- Dave,?? ? ? ? ? ? ? ? ? ? ? ?Technical Specialist,??--
--?? Lifetime Member:?////?--
--??--

Hi Don,

Yes, I had a productive phone conversation with Mike from Inovato yesterday. He mentioned that hams are roughly 1/3 of his customers. And he's very supportive of HamIQ which is my new name for HamPi for the Inovato Quadra. He's very excited to have our community's interest!

I spoke to Mike about the CPU throttling that happens during the extreme steps that the building of HamIQ puts the device through and so he's sending me a special 3-D printed fan attachment to help me cool down my device. He also extended technical support for me to build HamIQ, so I took the opportunity to ask a bunch of technical questions to understand the device better.

I also explained the importance of maintaining both USB 2 and USB 3 ports so that interoperability of radios would not be affected. For those who are not aware, I discovered quite some time ago that the USB cat control on some modern radios prefer USB 2 ports to USB 3.

HTH and 73,

On Thu, Nov 10, 2022, 11:28 AM Don--AE4DW <AE4DW.Don@...> wrote:

Has an invite to the group been extended to the Innovato folks? While they may not have any interest in amateur radio, what they see their product being used for may be of interest to them, along with, they might be a helpful resource for members here if we run into any challenging issues with their box.

--
-- Dave,?? ? ? ? ? ? ? ? ? ? ? ?Technical Specialist,??--
--?? Lifetime Member:?////?--
--??--

Has an invite to the group been extended to the Innovato folks? While they may not have any interest in amateur radio, what they see their product being used for may be of interest to them, along with, they might be a helpful resource for members here if we run into any challenging issues with their box.

Has an invite to the group been extended to the Innovato folks? While they may not have any interest in amateur radio, what they see their product being used for may be of interest to them, along with, they might be a helpful resource for members here if we run into any challenging issues with their box.