开云体育

Hi John The displayed map you are looking for will come _automatically_ when the time of year is not on equinox like now (begin of spring or autumn). This is not a bug, it is just nature! The way how

Off the top of my head, I do not know what the keystrokes are to change the display. However, I do know where you can find and read the manual: https://www.clearskyinstitute.com/ham/HamClock/ Hope

I have this display and I want this. How do I get it?

I want the “usual” grey line display on the Mercator map. Closest I can figure is to select “night” and that is just a black amorphous blob. What/where is the right combination of selections

Hi Dave Thanks for the quick answer. I now flashed with Etcher 1.13.3 under Arch Linux (EndeavourOS). It boots until a moment with a lot of ACPI errors and then the line "ALERT! UUID=6e...... does not

Hi Udo, Please try switching from Rufus to BalenaEtcher. That seems to work for a lot of folks. 73,

Hi group I have flashed a new USB stick with HamPC 3.0.1b1 (I have even booted Windows and used Rufus, as it was recommended in the file How_to_flash_image.txt), but when I try to start it, there is

Thanks, guys! It means a lot to both me and the project. 73.

I wrote one too! Good luck!

That did the trick David! Thank you for your help! FYI: I put a little recommendation for your HamPC on my Qrz.com page so I hope it helps! Keep up the great work! David L. Fodor, KD9JEO wrote:

David, Try testing the instructions in the third message in this message thread and see if that helps you:

Thank you, Udo. There are many other worthy open source projects. Just being recognized is a positive thing. :-)

By the way, I now see that when writing the nomination, I was logged in under my german call sign, DL3GN... Am 30.01.23 um 19:09 schrieb Udo Isaenko:

I just wrote a recommendation for HamPi. I hope, you will get the award for your big work and wish you all the best. 73 Udo, HB9ERD Am 30.01.23 um 18:15 schrieb Dave Slotter, W3DJS:

I just learned that QRZ is accepting nominations for your favorite ham radio FOSS project. If you all think HamPi or HamPC or HamIQ(tm) qualifies for recognition, would you please visit the link below

Hello everyone! I love the HamPC distro and have it installed on my Panasonic Toughpad which works well except for one issue. After a few mins the display goes into sleep mode even when displayed on

So; I have a PC I will be taking with me to install in my cottage shack, currently running Ubuntu 22.04.1 LTS, and was thinking about what software to install on it. I noticed that the HamPC

Ok Figured it out, I used my USB to HD adapter and the system saw it as a USB drive, used etcher to put it on the drive and had no issues with that. I did have to unzip the file and get to the raw img

Hi Rob, One can copy the image over to the internal drive the same way they can to a USB flash drive... -Dave wrote:

Ok it seems pointless to run HamPC from a VERY SLOW usb drive when it should run from the internal Hard Drive or SSD. I understand the Live boot but would also like an installer. Anyone managed to get