开云体育

I wouldn't worry abut the secondary voltage.? However, I have bucking
transformers on my outlets to lower the commercial AC down from 120v.

Question...? You wouldn't happen to have something connected to pins 1
and 2 on TA1.? You should only have a short across pins 3 and 4.

V1 pin 6 and pin 3 (L1 and C8) voltages look close enough.? I don't
understand why...with such a high voltage on pins 9 and 8 of V1.

It looks to me like the junction of L1 and C8 gets its voltage thru the
HOT R7 back thru R3, thru the S3 front function wafer pins 1 and 2.?
But, only in tune.? In CW, that voltage appears to come from R20 and R21
thru front function wafer pins 3 and 5. That's in the same circuit as
R29 and the neon lamps, which should be on in CW (I think) and flicker
in AM with modulation.? My eyes have gone double vision trying to figure
it out.

I wish someone else would tell us if their neon lamp is on during CW...?
Well, that's it from me.? Someone else needs to chime in.