Sounds like you don't have any RF at V1.? I'm assuming you're using xtal
control.? S1 should be in XTAL.? I have a jumper across? TA1 3 and 4 and
a key plugged into the key jack.? You should be able to hear the crystal
on a nearby receiver when in tune without keying the radio. See what
happens at V1 pin 6 when you key the transmitter in tune.
My schematic shows 2.5 mh for L1 and 190 volts thru to the plate V1 pin
3.? L2 100 uh and 350 volts thru to the plate V1 pin 9. It's 210 volts
on pin 8 thru R6 (12K 2watt).
Make sure the two neon lamps are working. One is under the chassis.? The
other is the right lamp on front panel.? Hope it's not a wafer switch issue.
toggle quoted message
Show quoted text
On 4/3/2025 12:56 PM, Larry - WA2DGD via groups.io wrote:
Joe Hutchens
AJ8MH - Radio
Marquette, MI
