Re: SR-160 Vernier Dial Lubricaion
开云体育
The clutch plates should remain clean and dry. Just keep working it from end to end, note position of the gears when it binds up and add a little more grease at that point.
Last resort:::?complete disassembly of the gear train and clean all the shafts.
NOT?to be attempted unless you are very confident in your dexterity and mechanical skills.
Walt Cates, WD0GOF
?
From: [email protected] <[email protected]> on behalf of Matthew VE3MXG via groups.io <ve3mxg@...>
Sent: Wednesday, March 19, 2025 9:00 PM To: [email protected] <[email protected]> Subject: Re: [HallicraftersRadios] SR-160 Vernier Dial Lubricaion ?
Hi Walt,
?
I have cleaned the old grease and added a small amount of white grease to the gears.? That has helped quite a bit.? However, the dial still sticks a bit.??
?
I also cleaned up the clutch plates.? Should I lube the clutch plates or leave them dry?
?
--
73s VE3MXG
Matt Gervais
|
waltcates