Re: SX-62 alignment instructions
开云体育Scott, I’m not too smart and also can’t read between the lines and words.? What is oscillating?, and at what frequency? I guess you see it on a scope unless it is from the BFO and out the speaker.?? ? You mentioned nothing about the history and if you have ever had it receiving or not on any band. ? Will it work on AM/CW on all bands ? ?and it is just the FM detector? On FM what happens with the signal generator off and an antenna ..nothing?, stations? Oscillations most of the time? Is your RG gain pot in good shape, or is it noisy, erratic? ??? I have a sx-62 of some version in sick bay so I am extra curious but it will take a while to understand things. ? From: [email protected] [mailto:[email protected]] On Behalf Of Scott Petersen via groups.io
Sent: Sunday, March 16, 2025 9:26 PM To: [email protected] Subject: Re: [HallicraftersRadios] SX-62 alignment instructions ? I did both alignments, and all seemed well until I switched in FM, and the gain was too high, and it wouldn't receive until I turned the RF control to 2-3, and only "works" in a small range, either too high, and oscillates and blanks, or too low a gain to hear anything. ? ._,_ -- don??? va3drl |
don Root