Re: SX-62 alignment instructions
开云体育
Thanks, I tried(the correct way), but I'm having issues with the FM, it has so much gain in FM that the oscillator stops, until I reduce the RF gain, I have to align it on 2-3? on the RF gain to get anything out of it. going to start over and try again.
From:[email protected] <[email protected]> on behalf of don Root <drootofallevil@...>
Sent:?Sunday, March 16, 2025 2:53 PM To:[email protected] <[email protected]> Subject:?Re: [HallicraftersRadios] SX-62 alignment instructions ?
Scott, as an aside, this is what they say for the S-20R .. they use the converter but disconnect it from upstream.
From:[email protected] [mailto:[email protected]]
On Behalf Of Scott Petersen via groups.io ? Thanks!, I didn't look up which pin did what, I thought it could have been the plate, and pulling the tube would isolate the RF coming in. SX-62B
From:[email protected] <[email protected]> on behalf of don Root <drootofallevil@...> ? Scott, It is a SX-62 {no suffix} ? Since the signal is injected on the grid, it would seem the tube would have to be in service. ?? ? -- don??? va3drl |