My experience with Hallicrafters is to keep things wired "as is"
when working on Hallicrafters if the receiver was never tampered
or worked on in later years.?
I'd keep the resistor values the same too? as Hallicrafters
seemed to use the closest values at hand at the time of
construction.? When re-capping and replacing resistors, why worry
about version?
The alignment instructions will stay the same anyway.?? Keeping
things the same will minimize mistakes and problems.
Lee, w0vt
toggle quoted message
Show quoted text
?
Would help to know the version. However, it
appears that the first E
does not have the adjustment on the back panel. not sure what
the
difference between the Mark 1 and Mark 2 are but both are in
the later
manual. There are probably marks stamped on the chassis
somewhere.
On 10/26/2024 6:21 PM, don Root wrote:
So Glen first needs to find out which
version he has?
--
Richard Knoppow
Los Angeles
WB6KBL
SKCC 19998
--
don??? va3drl
