开云体育

Hamfest season is coming!? Maybe with luck someone has what you need.? An alternative would?be to take a page from the ALPHA78 design and install a few fixed variable caps for a couple of your favorite bands and mount the switch for those on the load control shaft until you find the exact replacement cap.? Should be enough room in the final cage for a switch and a couple of caps. I'll keep my eyes open for that air variable load cap.? ?73 dave

On Thu, Apr 4, 2024 at 10:52?AM W7WRX <clark@...> wrote:

I went down that road. Can't find one online. I would need a double joint 1/4 inch.? That might be possible if I could find some parts.

On Apr 3, 2024 5:21 PM, "thoyer via " <thoyer1=[email protected]> wrote:

Possibly a flexible coupling shaft or maybe you can rig up a shaft with a universal joint in it?

?

Tom

W3TA

From: [email protected] <[email protected]> On Behalf Of W7WRX
Sent: Wednesday, April 3, 2024 8:17 PM
To: [email protected]
Subject: [HallicraftersRadios] SR2000 load cap

?

I am now three caps in.? None fit.? This one fits but shafts do not line up.? This must have Been a custom order cap for hallicrafters.??

Anyone got any ideas now?? Looking for a cap is officially over.? Now unfortunately we must modify the radio.

If I use gears, knob rotation will be backwards.?