开云体育

I have used those images numerous times . Believe they came straight from an ex-HP factory source years ago on the old Yahoo groups. Make sure you verify the ROM;s and the locations they are installed

Hi Rick,I used a BP Microsystems BP-1148 to program (6) TC574000D IC's. Perhaps those images are mislabeled. If you could email the files that would be great.?Many thanks,?GregSent from my Galaxy

Hi Greg, ??? What are you using to program the (6) memory IC's? We use an EE Tools -Chipmax programmer. I could email you the files if needed. Rick

Has anyone performed a successful firmware upgrade of an HP8920A using the Rev A.14.14 eeprom images located in the files section of [email protected]? I have tried and get a

Hi,I remember that Amtronix Instruments in USA had a kit available with calibration data on Epson card.Try sending them an email Regards * *

Hi Robert, Thanks, that's a very kind offer which I'd like to accept. I've still got your details, so I'll contact you direct as I may be able to call by on Sunday 19th late afternoon/early evening if

Hi Frank, If you are back this way anytime I have a converter you can have. VGA output. Robert.

Hi Robert, Thanks for your reply. Yes, it was the original NEC Multisync monitors I was thinking of. I have seen some on fleabay but didn't realise they would take full signal on the green input

Hi Frank, What do you mean by "multisync VGA"? If it is genuinely capable of running at 19.2 kHz, not 31.469kHz, then yes a you can use a? LM1881 to separate the sync and feed that and the video to

Hi, Thanks but the DSC-1024?are a bit rare and expensive second-hand, so I'm looking for a cheaper and simpler solution if there is one.

I use a Sony?DSC-1024.? It will convert any video format to any other very easily.

Hi all, I've been reading this thread with interest as I would like to get my 8924C screen to work on an external monitor. I was wondering if it is possible to just use an LM1881 to separate the syncs

Hello all, I thought I would post an update on my progress with with the input module problem I previously reported above. Well, I've managed to sort the problem after some initial pointers from

There were some sellers on ebay that offered an upgrade kit and PCMCIA "calibration" card. But those were usually for B models as the EPSON cards for A models are scarce. However the accuracy of such

I don't know what is involved swapping out the internal 5w pad for the 60w pad, but there went your good price.? There was a thread earlier where people were building their own. I have a 60w unit and

Hi, i'm Alessio IZ5RGO from Italy.? i'm near to buying a hp8920 for a good price, this machine is fitted with 008 option "5watt low power."? I ask if it is possible to revert back to the original

$92 on EBay? ..includes an antenna but it's a cheap model not one for permanent outdoor usage.IMHO

Gee, given the context of what you think I am trying to do, I might or might not pursue the path you suggest because I am somewhat of a cheapskate.? I would want the customer to spring for them but I

Yes, I do check operation from the ground.? No sense making a trip just to find some co channel user got their mic stuck in the seat.

wow ...given the context of what you are trying to do the GPSDO per site would be the path I would pursue.? The real PITA is often installing the exterior? GPS antenna and really about half the cost