开云体育

Bit of a cross post from HPAK group. For 250kHz signal generator usable output the 8920A/B must have a mechanical (relay) A23 output module. Option 055 was the normal option for a mechanical input

255 or 125 files? I remember in FAT that you could only put 125 (or 122?) files in the root dir Well, time to go after the other cards, I'm very curious about the "AM TESTS" card... Thanks for the

A small write-up to gather all the knowledge and data necessary to create a card https://tabajara-labs.blogspot.com/2021/01/como-gravar-um-cartao-de-memoria-no-pc.html (in portuguese, google

Hi, Glad you got it working. You can put as much software on the card as will fit or possibly 255 files max. No directories; they all go in the "root". The card I have has both RF tools and NA FM on

Just to update you all: I got an old notebook (toshiba L60?!) with pcmcia and windows XP. Inserted the HP 1MB SRAM card on it and copied the files of the RF Tools package to it. Worked flawlessly \o/.

Robert, I have NEVER EVER SEEN a pcmcia card works as a driver. But if you are saying, I'll give a try. I love to learn new things :D thanks for the tip! Enviado do meu Tele-Movel Em dom, 3 de jan de

I did some checks today and found the following. 1/ PC used old Sony laptop running XP and the "generic" PCMCIA memory card drivers from windows installled. 2/ Memory card was a SRAM 2m card with

Em 03/01/2021 11:04, Craig Harris escreveu: That is what solved my E8285A. It was a shorted tantalum cap on the 40V rail... -- ---8<---Corte Aqui---8<--- https://www.tabalabs.com.br

interesting that the MISC test passed when connecting DUPLEX to ANT. Would almost lead me to believe the loopback relay is bad or not getting activated during the selftest or a poor connection /

Servicing 101 is to first eliminate issues with the power supply. Granted keying high power into a sensitive cct is not advisable and can/will cause damage. (The Motorola units all have a fuse on the

Hello again, thanks for taking the time to reply. I have done a few more tests today to further isolate it down, I will start off with the 8920A the antenna input detector fails when I run the RF

The 8920A failure is a common problem and typically caused by someone keying into the antenna port. You have to pull the RF I/O and crack the case and look at the antenna port components. typically it

Hi Allan, I have no experience with the 8920s in particular but have years of experience with Motorola units. You haven`t detailed what you have done so far so lets take it from the top. Before

Hi everyone, I have a couple of questions regarding an 8920A and a 8920B I own. I have a fault on each and I am hoping someone here might be able to point me in the right direction. I noticed when

I bought a Dell Latitude E6410 on ebay for the purpose of reading PCMCIA cards.Cost was $50 wally

Thanks a lot, Craig and Robert. Now I'll find an old notebook with PCMCIA =) ---8<---Corte aqui---8<--- http://www.tabajara-labs.blogspot.com http://www.tabalabs.com.br ---8<---Corte aqui---8<--- Em

OP has a RAM card so not an issue, but you are correct, very few laptops have the 12V programming supply (I have a Sharp sub-laptop that does) and some Linear Flash cards need it. Not all cards though

I use MCE for both my tech2 and hp8920 linear flash cards. XP on an ancient laptop, the make and model escapes me right now but I can dig it out if necessary. I seem to recall some laptops don’t

Format the card in the 8285, then see if your PC will recognise it. If it does just copy the the RF Tools files (from

Mmmmm....... Interesting thought. Unlikely in a FW upgrade as it would require calibration. But there is potential for a hack. Success beyond intimate knowledge would hinge on whether the binary is