Re: How to write a PCMCIA SRAM card?
|
Robert, I have NEVER EVER SEEN a pcmcia card works as a driver. But if you are saying, I'll give a try. I love to learn new things :D thanks for the tip! Enviado do meu Tele-Movel Em dom, 3 de jan de 2021 18:42, Robert G8RPI via <robert8rpi= [email protected]> escreveu:
I did some checks today and found the following.
1/ PC used old Sony laptop running XP and the "generic" PCMCIA memory card drivers from windows installled.
2/ Memory card was a SRAM 2m card with write protection switch.
3/ Card formatted in the laptop for FAT, unknown capacity - result was a 512kB capacity card recognised? by windows.
4/ Individual fles (.pgm, .lib etc from the files ssection here) copied under windows.
5/ Card ejected and WRITE PROTECT SWITCH set to ON
6/ Card tried under "Tests" in a 8920B and I was able to load the programs into the test set.
The odd bit was it seems that the first time the card was put in the 8920B it had to have write protect on but subsequently it could be off.
This was hard to verify fully.
Robert G8RPI
|
Alexandre Souza