¿ªÔÆÌåÓý

  1. HP-Agilent-Keysight-Equipment
  2. Topics

k&s 1470 Wire bonding reconstruction

 

Hi,

A couple of months ago I bought a k&s 1470 wire bonding head to build my own on budget bonding machine for repair the famous HP yig oscillators.

I have finished reconstructing the mechanical parts of the bonding, but to start making the electrical part I need the service manual of the head.

I don't know if this is the correct group, but i hope sameone can help me find the service manual to finish this "big" project.

Best regards,
Massimo

WhatsApp Image 2024-06-09 at 20.37.51.jpeg
Bonding.jpg

 

Let me see what I can find, Massimo.? ?I used to work for Orthodyne Electronics, which has since been acquired by K&S.? I'll check with my contacts at K&S Orthodyne.? ? ? ? Jim Ford, Laguna Hills, California, USA?


On Fri, Jun 21, 2024 at 8:36 AM, iv3hed@...
<iv3hed@...> wrote:
Hi,

A couple of months ago I bought a k&s 1470 wire bonding head to build my own on budget bonding machine for repair the famous HP yig oscillators.

I have finished reconstructing the mechanical parts of the bonding, but to start making the electrical part I need the service manual of the head.

I don't know if this is the correct group, but i hope sameone can help me find the service manual to finish this "big" project.

Best regards,
Massimo

 

Thank you Jim for your helpfulness.

If anyone in the group has any questions about the project I am more than happy to answer them.

Regards,
Massimo
 

No problem, Massimo, I am happy to help out.? I did get a response from one of my contacts to reach out to another person who may be able to find you a service manual.? I need to look up that person;
?probably won't have time until tomorrow evening.? ? Jim


Thank you Jim for your helpfulness.

If anyone in the group has any questions about the project I am more than happy to answer them.

Regards,
Massimo

 

Hello,

I was also interested in getting a K&S wire bonding machine for the same
purpose to fix the HP YIGs but the ones that I found were missing parts.

I was looking for any manuals that showed the parts list so I can try to
identify exactly the missing parts but I found it impossible to find any
K&S manuals.

I am interested if anyone has user manuals and especially service
manuals for the 412x and 452x series of wire bonding machines from K&S.

One of the parts that the ones I found was missing was the heated
working table and I found exactly zero on eBay.

Let us know how is your project developing. I am more than interested in
updates.

Regards,
Razvan

On 24/06/2024 23:08, iv3hed via groups.io wrote:
Thank you Jim for your helpfulness.

If anyone in the group has any questions about the project I am more
than happy to answer them.

Regards,
Massimo
_._,_._,_
 

¿ªÔÆÌåÓý

It might be worth reaching out to Iban, EB3FRN, as he has my retired K&S 4526 which had the heated stage and manual. He has it setup and running-was considering adapting to deep access.

You could also try contacting Inseto in the UK as I have bought spares from them. Expect commercial pricing!

73 Lehane
G8KMH





-------- Original message --------
From: iv3hed@...
Date: 21/06/2024 17:39 (GMT+01:00)
Subject: [HP-Agilent-Keysight-equipment] k&s 1470 Wire bonding reconstruction

Hi,

A couple of months ago I bought a k&s 1470 wire bonding head to build my own on budget bonding machine for repair the famous HP yig oscillators.

I have finished reconstructing the mechanical parts of the bonding, but to start making the electrical part I need the service manual of the head.

I don't know if this is the correct group, but i hope sameone can help me find the service manual to finish this "big" project.

Best regards,
Massimo

 

Razvan, to get an idea of the components of the machine try looking up the patent for that bonding model.

I did the same thing for the 1470 and found these two patents:
US4202482
US4239144

I suggest you try looking them up at this site:

As for the heater, you can build it yourself with a power resistor.
In my heater I used a 50W resistor to get maximum 150 ¡ãC .
I attach some photos to give you some ideas.

Regards,
Massimo

Heater_total.jpg
Heater_detail.jpg

 

Hello Massimo,

Thanks for the tip with the patents!

As for the heater I already have some left over power resistors so I can
build something similar to yours.

I will most probably come to you with more questions regarding the wire
bonding machine.

73!
Razvan

On 25/06/2024 22:09, iv3hed via groups.io wrote:
Razvan, to get an idea of the components of the machine try looking up
the patent for that bonding model.

I did the same thing for the 1470 and found these two patents:
US4202482
US4239144

I suggest you try looking them up at this site:
<>

As for the heater, you can build it yourself with a power resistor.
In my heater I used a 50W resistor to get maximum 150 ¡ãC .
I attach some photos to give you some ideas.

Regards,
Massimo
 

Hello Lehane,

I was trying last year to send Iban EB3FRN an email but I cannot really
find his email address. I am watching his blog site and also his youtube
channel but I don't see how to get in touch with him.

Can you help me with his email address?

73!
Razvan

On 25/06/2024 09:10, Lehane Kellett (G8KMH) via groups.io wrote:
It might be worth reaching out to Iban, EB3FRN, as he has my retired K&S
4526 which had the heated stage and manual. He has it setup and
running-was considering adapting to deep access.

You could also try contacting Inseto in the UK as I have bought spares
from them. Expect commercial pricing!

73 Lehane
G8KMH

1 - 9 of 9