开云体育

Hello Tom,Page 207 for reloading constants from list previously recorded.I tried downloading a picture rastro_8593E_20160226.? Not sure if it got posted??I'll try attaching to this reply.

Hi Martin, The dimensions are critical, but easily done with a pair of scissors and an example spring. I made one by coloring in the spring stock with a magic marker pen, and carefully scribing the

Vladan,??????????????? thanks for the information that makes more sense from the description. I guess I could also have checked the schematic for the 8568B. since at least that

Hi Chuck, thank you for sharing your experience. Indeed I found two of the springs, on the floor but the other one seems to be lost and not inside the box. As an interim solution I might try to make a

Hi Rastro, many thanks for coming back on the HP8593E! So, you actually can change the leveling by entering new leveling information? I had a brief look at the calibration manual and I did see the

Tim, HSWP is not an analog signal. It's one of the digital control lines on the 8566/8568 bus. Pulling the line low stops the analyzer sweep. This line is not normally available to the user, but for

I was trying to understand the 85685A preselector better thinking it might be useful as a tuneable preamp without the SA. I have one which works but is a bit flakey probably due to sticky relays and

Hello Ed, I would like to have information about the keyboard and display you have used with the 8753D. Thanks. Steve, K8JQ

<hp_agilent_equipment@...> wrote: Naturally you have to match the connectors for all external accessories. Connect everything and look I believe the 8753D uses a CRT - not an LCD. I'm 99%

This is an example of what you can see in a listing window using the FuturePlus config and IA tools with an E2423A SCSI Bus Preprocessor on a 16700 series logic analyzer. I truncated most of the

Another option with the HP8753D is to use an external display, a fairly common PC display. I have used one for several years, and an external keyboard as well.? Both are easily availableas PC items,

Hello Tom,I also have a HP8593E - a little over a year now.? I really like it.? About a month after purchase it went blind - backup battery died.? I'm just glad it was not a blown front end.?

Joe, drop me a private post. If you can wait 3+ weeks until I can access my lab. Ill look to see if I have any AVANTEK GPDs of the correct spec. Ill send you one free if I do....Im really not certain

Anyone knows how to get at decent price a working order 22 or 26.5 GHz 10 dB glass replacement pad (so-called "Attenuation Card"), that's found in the 70 dB A9 input step attenuator of my 8562A SA?

Hi Ian, many thanks for the warm welcome. Now it's over with being incognito ;-) I'm trying to get into the high GHz field using high notch second hand HP equipment. Here's my complete HP inventory

Hi Rastro, many thanks for the very informative links! From what I can tell, the Weinschel attenuators are mechanically absolutely identical with the HP ones, either one builts in license from the

Many thanks for helping me on the syntax. Works great! Somehow, I thought nothing ought to follow the question mark...

Hi Gary, I had a similar problem with a HP5335A counter. What I did was to design a circuit board and place 10 series resistors on it, each 15 ohm, 0.25 W. These resistors were placed in series with

Bonjour ChristianMerci beaucoup pour le manual et journal.CordialementSteve To: hp_agilent_equipment@... Sent: Thursday, February 25, 2016 8:28 AM Subject: Re: [hp_agilent_equipment] HP