开云体育

Isn't it casagrande's project with a new name http://www.eevblog.com/forum/buysellwanted/for-sale-oshw-gpibusb-adapter/ https://github.com/Galvant I haven't tried it /Bingo

Anyone have a junker HP 3435A? I need the banana jack cap for the current input. This is the screw in cap that carries the fuse. It's common to other meters of the same vintage. A source for the whole

Assuming you mean 10 Megahertz, I would recommend the HP5381A. Very simple and small, it has a trim pot for calibration, plus provisions for an external frequency reference input. I have seen many

I bought a Marconi signal generator for part or repair (I hope the latter when I get around to it) from Israel. The packaging was excellent, postage quite reasonable and it arrived speedily without

Might want to take a look at the HP 5315A and B and the 5316A and B. I like the 5334B as well. Might want to download the manuals from the HP website (Agilent) and look at the various options and

Try http://www.rfsupplier.com/dust-jack-connector-p-819.html about $0.60 each David David G. Hopkins (VK4ZF) CAPALABA QLD AUSTRALIA 27.32.38S 153.12.03E QG62OL Skype :- davhop

I like the 5334B. A little patience and one can be gotten pretty cheaply. Calibration? Really just the frequency standard. How close do you need it to be?

I am beginning to shop for a better frequency counter for my test bench I don't need uhf or even vhf but I do want something HP that I can rely on 10mhz and below Something basically simple but not a

Not HP, but you might look at the Tek TM500 modules. -John =================

I purchased over $150 in parts (that's a lot for me!) for my 3585A SA from ...rf_parts in Isreal off of eBay. ? They were pwbs.?? Packed VERY well, ....nothing opened during shipment, ...cleared

They also made a GPIB-1284CT parallel port interface box. I have one of those. Don't remember ever actually using it.

National instruments used to make an Rs232 to 488 adapter years back.? This was based on a Z8 processor.? They stopped selling and supporting it a long time back,along with scsi bus interfaced

Try: www.caplugs.com They've been industry standard for 70+ years. -John ====================

Hello, Dave and the group-- Would flexible plastic thimbles do the job? For example... http://compare.ebay.com/like/251244162929 Usual and unusual disclaimers apply.... 73-- Brad AA1IP

Anyone know of a good source for BNC dust covers? I need a bunch. Cheers, DaveD

I've bought several things (a Miteq Ku band power amplifier and two HP 1345A boards) from Israel through, took about 2 weeks to arrive. No problems! Erich

Hello Ilan, I have a spare HP-8484A power sensor which is newly calibrated. I also have a 30dB precision attenuator to calibrate it with the 1mW output of the HP-436A. Price for both is EURO 165

I bought some Tek 7000-series parts from someone in Israel. Other than a long lead time (and it wasn't that long), there were no problems. I suspect that it depends on the seller, like any other eBay

In article <[email protected]@...>, Stuart <stuart.ian.richardson@...> wrote: Hmm, I noticed there was some stuff when I was looking round before

Hi, Anyone bought components / hp gear from Israel? Ebay!! Regards, Stuart.. From: hp_agilent_equipment@... [mailto:hp_agilent_equipment@...] On Behalf Of lists Sent: 14 March