开云体育

Thank you, Jorgen. Regards Miroslav Pokorni

Dear Colleagues, I'm looking for a HP 5355A plug in (frequency converter) for use in an HP 5345A counter. Anyone who has a spare kindly email me at: cesium_mike@... Regards, Mike,

<mpokorni2000@y...> wrote: http://groups.yahoo.com/group/TekScopArc/ Jorgen dj0ud

Hello Doug, What is the second Tek group. Regards Miroslav Pokorni

thanks Fred I did find 2 groups of interest for Tek on Yahurl. Doug <fwolsen@e...> wrote: TekScopes@...

I have a 5300A measuring system readout with a 5302A 50 Mhz counter. When I first turn the unit on, with the function knob dialed to "check" the counter reads 10.0000 Mhz but after it warms up for a

No, but there's a Tektronix group here on Yahurl. TekScopes@... Fred -- <>< -- Outgoing checked by Norton AV

Anyone know of any Tektronics forums? thanks Doug

yes is a 12 pin Jones connector. Yes I would be interested in that information.Either reply here or send me a e-mail dmac1054@.... <tractorb@i...> wrote: pot- I

If its a 12 pin jones connector its probably for a retransmitting pot- I can give you that info if you still need it. Dave Brown Christchurch, NZ

Hello Tom, I have a Motorola's MC12040P, what is plastic DIP, as oposed to L part, a ceramic package. I can mail you one piece if that would do it for you. Regards Miroslav Pokorni

Folks, Looking for the following ECL chip HP P/N 1820-1344 which crosses to Mot MC12040L Phase detector. Thanks Tom

dmac1054@... writes: Thank you, Doug. I will! Regards, Don

Hello Don, The old age does not lend itself to quick thinking. I just sent you an e mail offering to send you few panel nuts and did not think that you were talking about "speed nuts", but then you

Those guys might have a minimum order. I just remembered that I have few from a DEC's rack. They are square piece of metal, about 3/16 " thick with 10-32 thread cut and a spring retainer. If just few

Might try http://www.tinnerman.com/ Doug Agilent/HP The part is an a "support part for as work with your head

Thought I'd ask the group: I'm looking for a source for the C-clip "speed nuts" used in Agilent/HP equipment rack rails, such as in the N4043A ( nee 1181B ) cart. The part is an Agilent PN

I need the wiring for the plug on the back of this unit. thanks doug

Hi All, Just picked up an HP 651B and have a few problems. For one thing the unit seems to be extremely sensitive to the "band" selector switch, and the 10MHz range in particular. Switching to it

BTW, these use the COOLEST display decoders!!!