开云体育

Great place for Young Girls & Boys, or Mature Woman & Man to interact with each other. http://olderyoungersingles.active.ws/

Hi There, I need an HP8640B opt323 manual to fix my generator. I was told the manual is called an HP8640M for military. I've tried LOGSA and watched ebay for over a year, but nothing. The HP8640A

Hi Morris: I've looked further into the radio module and I think the only parts needed are a transistor and some support circuitry. The transistor is biased off and the negative input swing causes it

Hello Looking for the schematics for the HP 8656B signal generator. Hope some can help! Best Regards Hardy

Greetings everyone. Morris has kindly donated to me an HP5100B synthesizer. Unfortunately the matching HP5110B Driver was not part of the package (the original 5110B having now gone to that great

Might also be worth trying a tunnel diode. They are excellent at turning slow edges into fast ones, which is what you want if you're trying to generate harmonics. Stan Griffiths

Hi: As an alternative to using a Step Recovery Diode to generate the harmonics it may be possible to use a modified A45 Module from a PRC-77 military radio. The A45 Module is called "One-megacycle

Any of you have an user manual of this machine? o just know the pinout of 50 pins conection, pin to pin, crosed...

Hi Morris, i have copied the manual for the 5100A, except the parts list, which was missing in my copy, too. I send it tomorrow. With that, i send you two BA243S Switching Diodes which snaps well.

Hi all, I have been working on a 5110A synth driver with a problem of no output. After getting a manual I diagnosed a failure of the Step Recovery Diode in the harmonic generator and sure 'nough,

Hello Henry, Take the coversm off of the 8750A and look and see if the other interface board is attached to the bottom of one of the covers. The standard unit comes with two interface boards and you

I am looking for the HPIB (IEEE-488) commands for a 5005B Signature Multimeter. Usually, summaries of these codes are given on one page of the manual. Any help would be appreciated! Tom

Mine has the network analyzer interface that I failed to mention. I did see the prices and on the glkinst site and I can't justify them. 73 Hank WD5JFR

Cables can be obtained from http://www.glkinst.com/cables/hp_cables.htm . There will be some sticker shock involved. I believe there is also a "personality module" involved that configures the 8750A

Can the HP 8750A normalizer be used with the HP 141T? If so what kind of interface and cable is required. I have both but no interfaces or cables. tnx Hank WD5JFR

Hello again group, I am again asking if anyone has, or knows of any HP 4260A Universal Bridge units for sale, parts for sale or where I might find them. I have an HP 4260A that needs the main

Opps, sorry about that. I meant to reply privately and sent to the list instead. Looks like I have done that more than once. Aside from that, thanks to everyone who responded, on and off list, to my

Hi Robert, I got out the 140A and found it to not be worth fooling with. The top, bottom, and one side cover are missing along with both handles. It looks like it was being used for parts to repair

hi all looking for replacement timebase switch inserts analog,sweepdelay and main timebase (the black switch contact assembly with the contacts that break off all the time) any idears regards