开云体育

Howdy all- I'm looking for a service manual or schematic diagram for the HP 233A audio oscillator. Any help greatly appreciated. Thanks! Regards, Vollumscope

Hi All, I have a 652a (s.n. 826-01432) that has output level problems but only at a very specific range of frequencies. On the x10 range from ~40Hz to ~75Hz, the output level seems to be modulated

Hello all, I am after a working or otherwise HP4260A unit. I have one in good condition except for the large rotating resistor (R3). If you have one of these units, or know of one somewhere, I

Hi Gang, Some more info has become available. It appears that it is not called the HP8640M. The correct name is the USM-323. Anyone have one of these? 73 Ray vk2ilv Roger said: Ray said:

Hello Group, I have a pristene 54503A DSO with a problem in the Horizontal timebase. It fails with many codes mostly related to the trigger area. I could supply the codes on request. Does anyone

--- In hp_agilent_equipment@..., "Jorgen Lund-Nielsen" <dj0ud@w...> wrote: Hi Jorgen, I repaired it today. The knob was broken from the inside and pieces of plastic limited its

Hi Michal, i didn't knew the 8569, but be very careful with the knob, make sure that there is no slight defect in the switch which is probably repairable. if you use some force and some parts broke

Hi all, Is here someone kind enough to help me with my HP8569B? I got it today and I am little confused with frequency span button. Although it is marked up to 500MHz I can not set it to span greater

Hello, I am in need of the parts listing and the schematic of the Reverse Power Protection Module on the HP 8640B Sig gen. I have the Cal procedure but nothing else. Please let me know if you have a

Hi, i remember programming that chip some 20 years ago. It is fairliy simple and because the item is so small, you can do it "by hand" if you can't find another solution (wiring some switches and a

Hi All, I have a thermal printer HP 5150A that requires a new character code PROM on the BCD (Binary Coded Decimal) circuit card. (The HP part number is 1816-0561.) The PROM is type 74S188 which is

Hi, the opt.323 is not the same as the 8640M. I have both manuals, but i still don't have the manual for the Opt.323 Roger

Great place for Young Girls & Boys, or Mature Woman & Man to interact with each other. http://olderyoungersingles.active.ws/

Hi There, I need an HP8640B opt323 manual to fix my generator. I was told the manual is called an HP8640M for military. I've tried LOGSA and watched ebay for over a year, but nothing. The HP8640A

Hi Morris: I've looked further into the radio module and I think the only parts needed are a transistor and some support circuitry. The transistor is biased off and the negative input swing causes it

Hello Looking for the schematics for the HP 8656B signal generator. Hope some can help! Best Regards Hardy

Greetings everyone. Morris has kindly donated to me an HP5100B synthesizer. Unfortunately the matching HP5110B Driver was not part of the package (the original 5110B having now gone to that great

Might also be worth trying a tunnel diode. They are excellent at turning slow edges into fast ones, which is what you want if you're trying to generate harmonics. Stan Griffiths

Hi: As an alternative to using a Step Recovery Diode to generate the harmonics it may be possible to use a modified A45 Module from a PRC-77 military radio. The A45 Module is called "One-megacycle