开云体育

Hi Ed, Here are 3 text files from separate serial number 89605A/B units.? I don't think I have any 606 cal files.? Would be happy to collaborate to set up a test procedure to build cal files for

I have just bought an 8591A that has an intermittent REF UNLOCK error message when I use the internal 10 MHz reference. The error comes every 0,5 to 10 second. The internal reference is 10,000 MHz and

Thanks Robert.? That ties up with about 16.5V to chassis measured on that top pin.? The bottom pin seems to float. I'll try it on DC and see if that makes any difference.? I think that there's some

Hello, I need to disassemble ?the HP/Agilent 8495B ?attenuator, there are no visible screws, how can I do it if I need to service the attenuator ? Thanks in advance!

Hi Steve, Thanks for that advice. Why are 145 eyepieces better please? It seems 147 are very common. Best regards, Renaud

Inasmuch as this is a vintage equipment group you might consider an American Optical AO570 with the model 145 eyepieces for about $100 on eBay. I can attest to the superb optics, with magnification

I recently purchased this rare HP item off of eBay. It appears to be a trade show demonstration unit for selling HP's alphanumeric LED display modules. It is from 1970 (based on the date codes of the

Hi Alex, I used a demo version of Benchlink 33503A Pro to create triangle wave files in *.wvf, *.arb, and *.barb formats. For the 33522A, the waveform will appear on both channels

Does anyone have handy the HP part number on the interface IC used in the 10248 series of logic analyzer data probes? The manual on the probe has all part numbers listed except for the IC that is part

I'm glad you solved the problem and that I was at least a little bit helpful! Milan [email protected]> wrote:

HP list, the extension cables have been sold, Thanks for the responses, Gary WA2OMY

About a year ago one of my E4421B signal generators developed a display contrast problem. I left it for a while and then decided to see what info i could find about the problem. After a while i

Gary, I will take the extender cable kit. Let me know how you to complete. Thanks, Russ WA7MLW

Hey Yves, I found a threat for a 33210 where you created a testfie for a User. Is IT possible that you create a small barb File with all possible Parameters for my 33522a? Thanks in advance Alex

Would anyone have an example cal file they can share? I’d like to create one for my hardware

If you manage to separate the metallic parts form dielectrics , it is possible on older connectors. I recommend a solution of boiling water and sodium bicarbonate to clean the parts the process can

HP list, with all the interest in 8660's recently, I can offer this 11672A cable kit for sale. It is complete, but as expected the foam has deteriorated, everything will need to be cleaned. Hard to

I have an HP8714 VNA here, that we used to cart around the country servicing power amps.?? After one visit to a MRI place, the entire display was at 45' tilt! Eventually we degaussed the case

If you use methanol, please be extremely careful. Wear gloves, don't inhale fumes, etc. Methanol poisoning is no joke. Read up on it prior to use. --Tom -- Prof. Thomas H. Lee Allen Ctr., Rm.

After lots of trials with several solvents over the years I've found the best solvent for decayed PU foam is 99% methanol.