开云体育

I found that "DISK" actually needs to be? " :,700,0"? for my HPIB disk drive's address. I learned how to copy a? file from the HPIB disk to any SRAM and now have to see how to delete files on the

I need to do a purge of the equipment I have.? I got into electronics through repair.? So almost everything I have I restored myself from a broken state.? But I didn't really know if I would need

I use wire frame shelves on wheels for the working equipment. You can clamp it together.? The main workbench is also on wheels. For some equipment, the corner is beveled to allow access by crawling

I too mostly lurk, and post occasionally. Here is my lab. I have a smaller one also as I have not used this one in about 8 years. The tables are 6 foot long, but I had to put extra legs in the middle

Gang, Yves, welcome to the group. I mostly lurk way in the background. I find this to be a great thread. I, like many of you, am a great collector of test and measurement equipment. Most of it I

hello Yves, great repair that of the opt 130 In my case the opt 130 has always worked well and I have never needed to study it in detail Did you do the realignment by adjusting the trimmers on the

If you join the (rather pooly named) /g/HP8924-Family-Spectrum-Analyzers group you fill find the RF tools programs in the files section. Lots of other stuff for the 892x tests

Sorry, these would work for DB connectors but not the HIPB.? ?Well, wouldn't be able to daisy chain...

McMaster-Carr: These should work https://www.mcmaster.com/products/screws/system-of-measurement~metric/thread-size~m3-5/captive-panel-screws~/ Also thumb

Thanks everyone for your suggestions ! I am going to try a solution which re-purposes the screws from a discarded HP-IB connector, and of course I will post more details on this list if the experience

Ha Wilko, ik zie een 86290 die er "naast" staat een veel voorkomend probleem als gevolg van verlopen weerstanden. Het is snel te zien door de frequentie te checken in de basisband 2-6 via de

I've been accumulating T&M kit into my ham shack for quite a while now. The shack is in the attic which makes for a cozy but sometimes crowded workspace. I did, interesting maybe, choose the smallest

Joel, Where are you located? I have a couple of spares. Robert (UK).

Digikey and Mouser has them, but they are expensive.

At Keysight's website they had a pointer to the "1999 SCPI Command Reference".. Oh joy! I found the catalog command and the COPY commands right away. These do look to be the same files as I have so

Your remark is relevant, except that in my case, I have no other place for storage and this is probably also the case for many other people, with the little storage space that I have, only a few

I've made some progress on this project by having the dual disk drive talk to the HP8924C. I would like to transfer the calibration files on the Panasonic SRAM card into the disk drive. I'd like to

All of these nice labs with sturdy shelves are inspiring me to finally set up some shelves of my own. I would like to move the power supplies up and free up a little more space on the bench. Also try

I don't know if I would label them as redundant. Some are hot standby spares and in other situations multiples are required. In a prototype RF circuit three mixers in a downconversion chain will

The email address made of random charactors seems to be immune to harvesting and has remained spam-free.