开云体育

One more comment regarding maximum cable length. If you have option 010 (time domain), there is a limit to the time interval you can display, but I think that's tied to the math for the transform.

Karin, As I understand your question, you are concerned that the calibration data for a long cable requires larger numerical values due to the many 360 degree repeats of the phase. The analyzer

Based on recent painful experience, I've discovered a couple of things: 1. Some ISPs block based on listing in some questionable databases. In particular, the "UCEPROTECT" lists range from including

Oops, typo. That was www.debouncer.com -- Paul Amaranth, GCIH | Manchester MI, USA Aurora Group of Michigan, LLC | Security, Systems & Software paul@... | Unix/Linux - We don't do windows

Actually, that means the IP of your email server is blocklisted. If you do a reverse lookup on that, it resolves to mail-pj1-f53.google.com. You can look up IPs on line to see which, if any, blocklist

Many thanks for your great feedback. It gave me enough courage to pull the little card out. I found I had a pair of pincers with a hook on the tip. No idea what it was originally for, but worked

The 8557/58/59 used the same kind of disks you could possibly find a parts mule on ebay though there is no guarantee that its not going to suffer from the same disease as this was a common problem.

You can try contacting Sphere Research in Vancouver BC, Canada. They have a lot of HP parts. Those wipers are part of the discs that are in the switch assy and no part number exists for the wipers as

In the archive you will find discussion of this, including at least one account of improvising new contacts out of something else. Dave Wise Sent: Saturday, May 28, 2022 8:06 AM To:

Hi Ellud, Can you tell me where one can obtain those wipers? I have a HP8640B that is missing 3 in total on the FM/RANGE switches. Your help will be much appreciated. Donald PE1AHJ

This means your IP is blacklisted. is there a URL for remedy in the message? You can ask to be unblacklisted. It can be because your ISP allows too many bad customers sometimes.

Its a common issue that you have a lot of excess gain at lower frequencies and then roll off at higher frequencies normally you can combat this by using resistive feedback between drain and gate , it

Hello Lothar I do not need 27dBm output. As it is not the final Fet. but I think the gain of the SHF-0189 is too little. It has around 20dB at low freq but only 10 to 12dB at 4Ghz. so I might need

As far as I am aware, the port extension feature only adds pure phase. You enter a delay parameter, or a physical length + velocity factor. I don't recall ever seeing any option to dial in any other

I don't know about the 8753 in particular, but for the 8510, for example, the calibration correction factors are floating point numbers that are the coefficients for the third-order polynomial that

On 5/27/22 20:03, Matt Huszagh wrote: > I'm not really sure where to send this, but I figured some people on > this list might have an idea. > I sent an email to curator@... a few months ago

I'm not really sure where to send this, but I figured some people on this list might have an idea. I sent an email to curator@... a few months ago to get access to some software on their

I realized a couple of hours after sending the initial post, that I was incorrect with associating Calibration with the Port Extensions. Here is, I hope a better explanation of what I am trying to do.

[email protected]> wrote: This appears to go in the other direction, e.g. it allows using games emulated with a custom version of the MAME arcade emulator to be displayed on an authentic old-style

Hello, I have an HP 382 that I use to control an HP 3048A system. Currently, I have a disk image containing an HP BASIC 6.3 installation that I serve to the 382 with HPDrive. This works, but there are