开云体育

All: I was reading about the .FP file my generator produces when I want to copy a Plot. My understanding is they are HPGL file format. A review of how to open this format into a graphic, or plot the

Atillo the leakage inductance of the transformers under test,are,an issue at high end of band. If you short the transformers secondary you can measure series leakage inductance with a meter or RLC

Sorry I don't know where you can get a replacement, but if they are made anything like the belts on a couple Shugart SA800 drive I just repaired they should be ok.? You may see a little flutter in

Hi all, Some of you will be aware I was trying to find the source of the YTO unlock error I was getting displayed on the screen of my 8566B. I'd been advised elsewhere to scope the power rails for any

Well, It's probably more than only 'good practice' to remove the old 10MHz XTAL. I'd like to refer to this video from Veritasium, The Surprising Secret of Synchronisation:

OK, Jon. The values are in micro Henry, so low I don't think they affect the measurements at audio frequencies. -- Cheers Attilio

Thanks Paul - very helpful. Do you know of a source of replacement drive belts for these units? Thanks Tony

Ohmite REHO 150 10 LIN 10.039 14.2 uH Ohmite REHO 150 10 NONLIN 10.225 26.6 uH SPEAKER 5" 100 8 6.04 330 uH GLOBAR Carbo CX 100 30 25.5 2.0 uH Bon journee Jon

Hi Jim, Dave at Artek Manuals (www.artekmanuals.com <http://www.artekmanuals.com/>) list several scanned manual choices for the HP-5316B. You can buy a download for between $9.50 and $15.00 and for a

Hi Udo, im a bit late, but looks like you can get it from the internet archive: https://archive.org/details/B37601424316700A.02.90.00 Matt

They useNational in many parts of the world, but in the United States we already had National Radio. The top level is Matsushita.

It may not be Panasonic, but Panasonic is the parent company. Does it have another name on it?? I have an audio distortion meter and had an incredible difficulty finding anything on it, finally did.

Sorry I have just read it again , I only had a problem with programming, I do not have this programmer Thanks Dave david.partridge@...> wrote:

Hi David I had a problem like this, I had to select a higher programming voltage Good luck Dave 2E0DMB david.partridge@...> wrote:

Greg, I have some files for my specific Panasonic FM generator model (owner manual and schematic), but I can't find one for yours in places I'm aware of. But I am seeing this:

I have a Panasonic VP-7633P Multiplex Stereo Modulator that had been giving good service but started to produce some errant behavior. Unfortunately there is no service or operation documentation

I own a late version HP5316B that I am working on.? This is the version with the long, single PCB which I believe to be the last rev.. I have downloaded the HP5316B counter service manual from

Taa Jon and Dave..................................................................................................................Don C. wrote:

Hello-- I? rounded up another batch of boxed NOS GE-branded 7239 vacuum tubes. These are used in the? HP 851/8551 A/B spectrum analyzer and the HP 693B? 4-8 GHz sweep generator. Picture a 12AX7

I got the testset in yesterday and popped the lid , only 4 pins are connected and the PIN numbers match the PIN numbers of the connector on the 8341B that are referenced in the service manual so it