开云体育

Thanks for the tip. I'll get the manual right now ! Joel Setton

-- HP8558B Versus HP182T Sweep Fail. Good year 2022 without the accursed bug. Well there everyone In April 2019 my HP8558B decided to let it do the sweep Fig0 , I found that only with external sweep

I effusively vote for something akin to Gerald's solution. Replacing old failed capacitors with old not-yet-failed capacitors is not the best path forward IMHO. I always try to work out a solution

Hi Joel, ? Artek?Manuals has a high quality pdf of the operating and service manual with schematics for $7.50. As a very satisfied customer for the past many years I highly recommend Artek?Manuals!

I'm currently looking for any patents released for the HP 8662/3A, mostly to determine if there's any information about the firmware that will help in debugging a faulty DCU. HP released the source

One of them tests completely open, and the ESR on the other is several hundred ohms.... I have located a set of capacitors through another person on this list, so hopefully replacing them (and all the

The systematic is the same on pretty much all HP 8752/53/19/20/22 analyzers, you find the serial number and the 3 Fx codes are setting the options! one word of caution though on the 8753E/ES CPU

Does anyone know the pinout of the 08516-60009 interconnect cable that connects the 8516 to the 8341B ?

http://artekmanuals.com/manuals/hp-manuals/ Am 21.02.2022 um 08:24 schrieb Joel Setton:

Hello Why cange them. Are they tested bad or just want to change them ? best regards Peter ________________________________ Fra: [email protected]

Hello, Has anyone heard about the HP 14570A ? This is not a well-known product, it is an AC Power Switch, made by the New Jersey Division (formerly Harrison Labs), and described with some detail in

Anyone know what scope this transformer was used on?

Hi Marcus: I am not sure that is entirely true yet. While I am pleased with the result, I worry that when I disabled OPT11, but then used 01 01 01 at address 0x00 - 02, which enabled OPT 10 only, may

Hello Bill, Try erevisited@... re your 16NN machine. 73 de Brian, VK2GCE. Sent: Monday, 21 February 2022 11:10 AM To: [email protected] Subject:

Indeed, but who needs a skinless cat at a transmitter site? TV was more fun, dealing with Vestigial Sideband filters and RF combiners to use a single antenna for NTSC broadcast. I engineered at one

It is also used in the 5316B model. I bought two of them on Ebay. at different times. Both work, and they were under $30 each, plus shipping. wrote:

I recently dug out two 8640B sig generators I acquired last year. The newer (SN 16xx) has options 1 and 2 and seems to have RF as far as the counter goes but nothing at the output or the meter. The

You Could try this. Still fine and working since I re-built the unit back in 2012. Regards Gerald VK3GJM

Hi From memory it is only a low frequency counter that go for about ?120 is it worth re-engineering ? Regards Paul Sent: 20 February 2022 22:56 To: [email protected] Subject:

Hi Bob, I long ago gave up trying to find replacement electro caps that are both electrically and physically compatible. Modern ones tend to be quite a bit smaller, so I just either make an adapter