开云体育

It shows the latest for the "A" version. And then probably the latest for the "B". What's the problem?

FWIW, metal and carbon film resistors can dissipate a lot of heat. The factory I worked at, who specialized in precision resistors, found that carbon film resistors on ceramic cores (which is nearly

As was I, and so I said in my post. HP didn't always follow that advice. The 608F signal generator has a metal film power resistor in one of its circuits that, by design, dissipated twice its rated

Generally speaking, avoiding heat in a wire wound resistor is right up there with avoiding heat in your home heating system. If you were it put in a higher wattage more modern resistor, you most

Why not put a list of his stuff here? That way he won't get buried in emails.

Hi Frank, and anyone else who might like a copy, I've uploaded a 2006 copy of? IO Libraries Suite 14.2 to Mediafire...

Hi Richard, You should replace C13 if it is getting hot. You can use three 10 uF 630 volt electrolytics for that. I haven't taken my 200CD down to check the R30/31 situation but it certainly looks

I was always taught to hold power dissipation in a resistor to one-half its power rating. Bob

Thanks Chuck Its a 10w resistor with about 9w dissipation so I guess it is doing what it was designed to do. As a hobbyist only having worked on a few solid state amplifiers, all you read suggests

I would like to take the time to thank all for helping me with my meter question. mark javit

<kb2mxv@...> wrote: Also, if you really want 14.2, go here: www.keysight.com/find/iosuite Click on Previous Versions, and then scroll down to 2006-06-01 Version 14.2.8931.1 and then you can

Thank you Tom

Version 15.0 will run on XP. See https://www.keysight.com/us/en/lib/software-detail/instrument-firmware-software/keysight-io-libraries-suite-150-sw165.html Tom Bryan N3AJA

Can someone help me find Agilent IO Libraries Suit 14.2 please. I need it for a windows XP machine. Thanks

Hi Mat Ideal for supporting light instruments such as 2 off 437 power meters but I wooden risk 2 off 3314 Function generators But then 2 side supports with a bit of metal spanning them is probably

These are the ones I use for most things: https://www.ebay.com/itm/283824130344 I first spotted them (and Navepoint as a company) on eBay, so I just ended up buying them there. As I mentioned earlier,

There's no real rule of thumb. Some people insist that cantilevered mount via ears alone is never safe, but a lifetime of seeing equipment mounted that way, and having a lab full of some and a

This has been converted to read the output voltage of a HeNe laser power supply e.g. Voltex Inc S-28-LI unit.

Nice!? The advantages of living where property values are sane.? Unlike Southern California where I live, at least anywhere near the coast.? Plenty of cheap land out in the desert....? ?